2-2-2-4 Aluminum Mobile Home Feeder Direct Burial Cable 600V

Allowable Ampacity for 2-2-2-4 Aluminum Mobile Home Feeder Cable: 100 Amps

Applications:

The 2-2-2-4 Aluminum Mobile Home Feeder Cable is a 100-amp, 600V-rated service entrance cable designed to deliver power from a utility meter base to the main distribution panel in a mobile or manufactured home. In this 2-2-2-4 configuration, it is also widely used as a 100-amp feeder to subpanels in modular buildings, detached garages, workshops, sheds, and small residential or light commercial units.

This cable is approved for direct burial when marked as USE-2 and may also be installed in conduit, ducts, or raceways in wet or dry locations. It is insulated with cross-linked polyethylene (XLP) for superior resistance to moisture, abrasion, corrosion, and chemicals—making it ideal for outdoor and underground installations.

Also Known As:

2-2-2-4 aluminum cable, 2-2-2-4 aluminum wire, 2-2-2-4 mobile home feeder cable, 2-2-2-4 underground feeder cable, 2-2-2-4 service entrance cable, 2-2-2-4 electrical feeder cable, 2-2-2-4 power feeder cable, 2-2-2-4 MHF cable, mobile home electrical wire, 100 amp mobile home feeder wire.

Standards:

• Ampacities based on National Electric Code, 2005n edition, section 310-15 

• National Electric Code (NEC)

• UL 44 for types RHH & RHW-2 

• UL 854 for type USE-2

• ASTM standards B 800, B 801 

• Sunlight resistant 

• RUS ACCEPTED

Construction

Conductors:

The 2-2-2-4 cable includes two 2 AWG phase conductors, one 2 AWG neutral, and one 4 AWG ground. All are compact stranded 8000 series aluminum per ASTM B-800/B-801.

Insulation:

It has cross-linked polyethylene (XLP) insulation. The conductors are normally cabled together with XLP insulated aluminum ground or bare copper ground and covered with reinforced binder tape. XLP insulation is tough and resistant to impact, abrasion, chemicals, acids, oils, industrial solvents, and weather.

Specifications:

• Cable Construction: 2-2-2-4

• Phase Conductor; Insulation (mils): 60

• Insul. Phase Conductor; Diameter (inches): 0.390

• Insul. Grounded (Neutral) Conductor; Diameter Inches: 0.390

• Insul. Equipment Grounding Conductor; Diameter Inches: 0.290

• Cable Diameter Inches: 0.944

• New Weight lb/1000FT: 343 lbs

• Ampacity: 100 Amps