Product Information

Specification

About:

The GAALFIRE 90 cable is engineered for environments where enhanced fire performance and emission of low smoke and corrosive gases are crucial. It features a bare copper conductor and aluminum tape shielding, ensuring effective electrical performance and interference protection. The "Red Halogen-Free" designation indicates that the cable's insulation does not contain halogens, which reduces the emission of toxic gases and smoke in case of fire. Rated at 0.6/1KV, it is suitable for medium-voltage applications.

Also Known As:

• Fire Resistant Security Cable
• Low Smoke Zero Halogen (LSZH) Security Cable
• Halogen-Free Fire Alarm Cable
• 0.6/1KV Shielded Security Cable

Applications:

Screened Cable For Power, Signaling And Control Elastometric Isolated Compound Fire Retardant, Ls0h, With Flexible Wires Protected By Fire Resistant Barrier Suitable For The ‘power Users’ Emergency Areas With Danger Of Explosion Or Fire (Exits And Emergency Lighting , Alarm Signals, Warning Of Smoke Or Gases, Escalators, Pumps,
Fire Protection, Fire Curtains, Etc.).

Standards:

• International Electrotechnical Commission (IEC) standards for fire resistance and halogen content
• European standards (EN) related to fire performance and safety
• Local or national standards for electrical safety and fire resistance

Construction:

• Conductor: Flexible Red Copper Conductor Cl.5,acc. To Iec 60228
• Insulation: Rubber Type G10
• Wrapping: Glass/mica Tape, Wrapped To Helix
• Stranding: Wires Twisted Together In Concentric Layers,wrapping Overlapped Polyester Tape
• Screen: Electrostatic Screen Of Plastic And Aluminium Tape + Tinned Drain-wire
• Outer Sheath: Red (Ral 3000), Halogen-free Type M1

Features:

• Acc. To Cei Unel 00722-00725
• Conductor Acc. To Cei 20-29, Iec 60228
• Insulation And Sheath Acc. To Cei 20-11
• Compound Lead-free Acc. To Cei 20-52
• Insulated Cables Fire Resistant With Elastometric Compound With Nominal Voltage ≤ Uo/u 0,6/1 Kv Acc. To Cei 20-45
Noburn Cables With Imq Are Marked:
• - Cei 20-45 Ph 90 (Outer Diameter Up To 20 Mm) They Are Fire-resistant Complying With Cei 20-36/4-0 (En50200) Regulation, Wich Requires A Minimum Working Time Of The Cables During The Test, That Is The Cable Has To Be Exposed To Direct Fire And Mechanic Shock For 90 Minutes At 842 C.
• Noburn Are Also “no Flame Propagation On The Single Vertical Element” Cables, Compliyng With Cei 20-35 (En And Iec 60332-1) Test.
• Moreover, The Cables Are Made With Special “without Halogen” Blends Complying With Cei And Cenelec Regulation, In Order To Prevent Any Risk Coming From Any Toxic Substance Issued During The Combustion.
• That Characteristic Is Verifed By Many Laboratory Tests At Imq And It Limits The Issue Of Corrosive, Acid And Toxic Gas And The Formation Of Murky Smoke In The Surrounding Ambient In Case Of Fire.
• Noburn Cables Are Made Complying With Cei 20-45 Regulation And They Are Not Included In Cei 20-38 1.
• However, They Have Equivalent Prescriptions About The Test Regarding The Formation Of Toxic And Corrosive Smoke And Gas.

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.