Product Information

Specification

16 AWG 7C Bare Copper Shielded Al Tape Red Halogen-Free GAALFIRE 90 0.6/1KV Security Cable

Allowable Ampacity for 16 AWG 7C Bare Copper Shielded Al Tape Red Halogen-Free GAALFIRE 90 0.6/1KV Security Cable:100 Amps

About:

The 16 AWG 7C Bare Copper Shielded Al Tape Red Halogen-Free GAALFIRE 90 0.6/1KV Security Cable is designed for critical and secure electrical applications. It features 16-gauge conductors, aluminum tape shielding for electromagnetic interference protection, and halogen-free materials to minimize toxic gas emissions in fire situations. Rated at 0.6/1KV, it is suitable for low-voltage security and safety systems, ensuring reliable and safe operation.

Also Known As:

• 16 AWG 7 Conductor Shielded Fire Resistant Cable
• Halogen-Free Flame Retardant (HFFR) Security Cable
• LSZH (Low Smoke Zero Halogen) Shielded Security Cable
• Fire Performance Security Cable

Applications:

Screened Cable For Power, Signaling And Control Elastometric Isolated Compound Fire Retardant, Ls0h, With Flexible Wires Protected By Fire Resistant Barrier Suitable For The ‘power Users’ Emergency Areas With Danger Of Explosion Or Fire (Exits And Emergency Lighting , Alarm Signals, Warning Of Smoke Or Gases, Escalators, Pumps,
Fire Protection, Fire Curtains, Etc.).

Standards:

• IEC standards for electrical and fire safety, ensuring global compliance and interoperability.
• EN standards related to construction products and their performance in fire conditions, guaranteeing a high level of safety in European installations.
• Potential national or local codes that dictate the use and installation of electrical cables in safety-critical environments.

Construction:

• Conductor: Flexible Red Copper Conductor Cl.5,acc. To Iec 60228
• Insulation: Rubber Type G10
• Wrapping: Glass/mica Tape, Wrapped To Helix
• Stranding: Wires Twisted Together In Concentric Layers,wrapping Overlapped Polyester Tape
• Screen: Electrostatic Screen Of Plastic And Aluminium Tape + Tinned Drain-wire
• Outer Sheath: Red (Ral 3000), Halogen-free Type M1

Features:

• Acc. To Cei Unel 00722-00725
• Conductor Acc. To Cei 20-29, Iec 60228
• Insulation And Sheath Acc. To Cei 20-11
• Compound Lead-free Acc. To Cei 20-52
• Insulated Cables Fire Resistant With Elastometric Compound With Nominal Voltage ≤ Uo/u 0,6/1 Kv Acc. To Cei 20-45
Noburn Cables With Imq Are Marked:
• - Cei 20-45 Ph 90 (Outer Diameter Up To 20 Mm) They Are Fire-resistant Complying With Cei 20-36/4-0 (En50200) Regulation, Wich Requires A Minimum Working Time Of The Cables During The Test, That Is The Cable Has To Be Exposed To Direct Fire And Mechanic Shock For 90 Minutes At 842 C.
• Noburn Are Also “no Flame Propagation On The Single Vertical Element” Cables, Compliyng With Cei 20-35 (En And Iec 60332-1) Test.
• Moreover, The Cables Are Made With Special “without Halogen” Blends Complying With Cei And Cenelec Regulation, In Order To Prevent Any Risk Coming From Any Toxic Substance Issued During The Combustion.
• That Characteristic Is Verifed By Many Laboratory Tests At Imq And It Limits The Issue Of Corrosive, Acid And Toxic Gas And The Formation Of Murky Smoke In The Surrounding Ambient In Case Of Fire.
• Noburn Cables Are Made Complying With Cei 20-45 Regulation And They Are Not Included In Cei 20-38 1.
• However, They Have Equivalent Prescriptions About The Test Regarding The Formation Of Toxic And Corrosive Smoke And Gas.

Specifications:

• AWG No: 16
• No.of cores x cross section n x mm2: 7G1,5
• Outer-Ø ca.mm ± 10%: 12,9
• Copper weight kg/km: 105,6
• Nominal voltage: Uo/U 0,6/1 kV
• Test voltage: 4 kV
• Temperature range:  - 40 o C up to + 90 o C
• Min. bending radius: 12 x d
• Cable weight approx. kg/km: 228
• Part Number: 49070GR1071M15

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color