Product Information

Specification

Allowable Ampacity for 18 AWG 4P Stranded BC Shield Al Tape PE Armour PVC RE-2Y(St)YRY 300V Instrumentation Cable: 100 Amps

About:

This cable features an 18 American Wire Gauge (AWG) single pair (4P) configuration, providing a thicker conductor compared to higher gauge numbers, which allows for better signal transmission over longer distances or in high-power applications. It is specifically designed for industrial environments where durability and interference protection are critical.v

Also Known As:

While the cable might have specific manufacturer or industry nomenclature, its description typically reflects its construction and use case, making it identifiable for procurement and installation purposes. Specific naming can vary by region or manufacturer.

Application:

These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, natural gas and petroleum plants. With blue sheath it is suitable for intrinsically safe systems. these cables are for indoor/outdoor installation, in dry and wet locations, on rack trays, in conduits.

Standards:

• The cable is likely designed and tested to comply with international standards such as those from IEC, EN, or VDE, ensuring its suitability for industrial applications.
• It meets the electrical requirements for 300V applications, providing assurance of its performance and safety in specified environments.

Construction:

• Conductor: Stranded red copper conductor Cl. 2, acc. to IEC 60228, DIN VDE 0295
• Insulation: PE compound
• Colour cores: white-black, with black progressively numbered
• Stranding: Conductors twisted in pairs
• Wrapping: Polyester tape
• Screen: Electrostatic screen of plastic and aluminium tape + tinned drain-wire
• Inner Sheath: PVC compound
• Armour: Galvanized steel wires
• Outer Sheath: black (RAL 9005), or blue (RAL 5015), special PVC compound

Features:

• fl: On Request
• Standard TS/DIN EN 50288-7
• Insulation thickness: mm 0,50 0,75 1 1,3 1,5
                                       mm 0,40 0,40 0,40 0,45 0,45
• Conductor Resistance: mm 0,50 0,75 1 1,3 1,5
                                         Ohm/km 36,7 25 18,5 14,2 12,3
• Insulation Resistance: min. 5 GOhm x km
• Mutual Capacitance: ≤ 4 pairs all other pairs
0,50 mm2: max. 115 pF/m max. 90 pF/m
0,75 mm2: max. 115 pF/m max. 90 pF/m
1,0 mm2: max. 115 pF/m max. 90 pF/m
1,3 mm2: max. 120 pF/m max. 105 pF/m
1,5 mm2: max. 120 pF/m max. 105 pF/m
• Capacitance Unbalance: (1 kHz): max. 500 pF/500 m
• L/R (oran-ratio) (max.): mm² 0,50 0,75 1.0 1,3 1,5
                                            mm² 25 25 25 40 40

Specifications:

• No. of pairs x cross section n x mm²: 4x2x1
• AWG no.: 18
• Outer-Ø ca.mm ± 10%: 15,9
• Copper Weight kg/km: 82
• Nominal Voltage: 300 V
• Test Voltage: 2 kV
• Temperature Range: - 30° C up to + 70° C
• Min. bending radius: 10 x d
• Cable Weight approx. kg/km: 420
• Part Number: 47140C.X042M10

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color