Product Information

Specification

Igus MAT9960912 12 AWG 4C 90 Degree Plug Socket A / Coupling Pin B Connector TPE Fanuc LX660-8077-T293 Power Cable

Allowable Ampacity for Igus MAT9460912 12 AWG 4C 90 Degree Plug Socket A / Coupling Pin B Connector PVC Fanuc LX660-8077-T293 Power Cable: 100 Amps

Also Known as: 

Power Connector, Igus Power Connector, IGUS, Igus Pin A Connector, Igus Connector, Coupling Pin A Connector

Construction:

• Conductor: Conductor cable consisting of pre-leads (following DIN EN 60228).

• Conductor Insulation: Mechanically high-quality, especially low-capacitance TPE mixture

• Conductor Construction: Cores stranded in short pitch length over a centre element for high tensile stresses

• Conductor Identification: Cores black with white numerals, one core green-yellow.
1.Core: U / L1 / C / L+
2.Core: V / L2
3.Core: W / L3 / D / L-
4. Core: 4 / N

• Overall shield: Extremely bending-resistant braiding made of tinned copper wires. Coverage approx. 70% linear, approx. 90% optical.

• Jacket Color: Signal black (similar to RAL 9004)

• Outer jacket: Low adhesion, especially abrasion resistant and highly bending resistant mixture on the basis of TPE, adapted to suit the requirements in e-chains®

Properties and Approvals:

• UV resistance: High
• Oil Resistance: Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA
• Flame retardant: According to IEC 60332-1-2, CEI 20-35, VW-1, FT-1
• Silicone-free: Free from silicon which can affect paint adhesion (according to PV 3.10.7 – status 1992).
• UL/CSA AWM: See data sheet for details
• NFPA 79: Following NFPA 79-2012 chapter 12.9
• DNV: Certified to DNV type examination – certificate no.: 13 656-14 HH
• EAC: Certified according to No. TC RU C-DE.ME77.B.01255
• CTP: Certified to no. C-DE.PB49.B.00420
• Lead free: Following 2011/65/EU (RoHS-II)
• CEI: Following CEI 20-35
• Clean room: According to ISO Class 1. Outer jacket material complies with CF240.02.24, tested by IPA according to standard 14644-1
• CE Guideline: Following 2014/35/EU

Specification:

AWG size: 12
Number of Conductor: 4
Conductor: Pre-leads
Insulation: TPE
Jacket: TPE
Outer Diameter: 0.51 inch
Copper Index: 136.4 lbs/mft
Voltage: 1000 V
Weight: 194.9 lbs/mft 
Part Number: MAT9960912

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color