Product Information

Specification

Igus MAT9560010 12 AWG 4C Unidrive Circular Connector PVC Control Techniques PS B C A B XXX Pre-Assembled Servo Motor Cable

Allowable Ampacity for Igus MAT9560010 12 AWG 4C Unidrive Circular Connector PVC Control Techniques PS B C A B XXX Pre-Assembled Servo Motor Cable: 100 Amps

Also Known as: 

Motor Cable, Igus Motor Cable, IGUS Cable, Igus Circular Connector Cable, Ready Cable, Base Cable

Construction:

Conductor: Fine-wire stranded conductor in especially bending-resistant version consisting of bare copper wires (according to DIN EN 60228)
Conductor insulation: Mechanically high-quality, XLPE mixture
Conductor construction: Cores stranded in short pitch length over a centre element for high tensile stresses
Conductor identification: Cores black with white numerals, one core green-yellow.
                                            1.Core: U / L1 / C / L+
                                            2.Core: V / L2
                                            3.Core: W / L3 / D / L-
                                            4. Core: 4 / N
Inner jacket: PVC mixture suited to the requirements in e-chains®
Overall shield: Extremely bending-resistant braiding made of tinned copper wires. Coverage approx. 70% linear, approx. 90% optical.
Unshielded: No
Outer jacket: Low-adhesion, oil-resistant mixture on the basis of PVC, adapted to suit the requirements in e-chains® (following DIN EN50363-4-1)
Jacket color: Jet black (similar to RAL 9005)
CFRIP®: Quickly stripping: CFRIP® tear strip at inner jacket

Properties and Approvals:

UV resistance: Medium
Oil resistance: Oil-resistant according to DIN EN 50363-4-1
Flame retardant: According to IEC 60332-1-2, CEI 20-35, VW-1, FT-1
Silicone-free: Free from silicon which can affect paint adhesion (according to PV 3.10.7 – status 1992).
UL/CSA AWM: see data sheet for details
NFPA 79: Following NFPA 79-2012 chapter 12.9
EAC: Certified according to No. TC RU C-DE.ME77.B.01255
CTP: Certified to no. C-DE.PB49.B.00420
Lead free: Following 2011/65/EU (RoHS-II)
CEI: Following CEI 20-35
Clean room: According to ISO Class 2. Outer jacket material complies with CF5.10.07, tested by IPA according to standard 14644-1
CE guideline: Following 2014/35/EU

Specification:

Number of Conductors and AWG size: 4 C x 10 AWG (6.0)
Conductor: Bare Copper
Insulation: XLPE
Jacket: PVC
Outer Diameter: 0.63 inch
Copper Index: 193.5 lbs/mft
Voltage: 1000 V
Weight: 305.7 lbs/mft 
Part Number: MAT9560010

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color