Product Information

Specification

Allowable Ampacity for 4/0 AWG 1C Bare Copper Unshielded EPR PVC 35KV 100% Gaalflex Type MV-105 Cable: 100 Amps

About:

MV-105 Cable: This cable is a medium voltage power cable designed for electrical power transmission. It features a 4/0 American Wire Gauge (AWG) single conductor, made of bare copper. The cable is unshielded and uses Ethylene Propylene Rubber (EPR) for insulation and Polyvinyl Chloride (PVC) for the outer jacket. It is rated for 35KV (kilovolts) with a 100% insulation level, making it suitable for higher voltage requirements compared to standard cables.

Also Known As:

It may also be referred to as a 4/0 AWG medium voltage power cable, bare copper unshielded cable, or EPR insulated PVC jacketed cable.

Application:

This cable is typically used in power distribution networks, both in indoor and outdoor environments. It is suitable for industrial, utility, and commercial electrical applications, particularly where high voltage and robust insulation are necessary.

Standards:

• UL 1072
• ICEA S-97-682
• ICEA S-93-639

Construction:

• Conductor: Compacted concentric soft drawn bare copper Class B acc. to ASTM
• Inner semi-conductive layer: semi-conductive extruded thermosetting polymeric layer
• Insulation: Special rubber EPR compound
• Outer semi-conductive layer: semi-conductive extruded thermosetting polymeric layer
• Screen: Red copper tape
• Outer Sheath: Black (RAL 9005), special PVC compound

Features:

• Suitable for Direct buried, aerial installation, cable trays (CT)*, troughs or raceways *(CT use 1/0 AWG and larger)
• Suitable for wet or dry locations
• Sunlight resistant
• On request compressed or compacted stranded conductors
• On request compacted concentric stranded aluminium conductor Class B acc. to ASTM
• On request LLDPE*, CPE or Halogen-free insulation *(UL does not recognize LLDPE AS MV.105)
• On request red copper wires screen
• On request oil resistant outer sheath
• On request low coefficent PVC outer sheath
• On request acc. to CSA C68.10 (FT4 250 MCM and larger, -40°C cold impact and cold bend)
• acc. to AIEC CS-8
• RoHS approval

Specifications:

• Cross section AWG/MCM: 1 x 4/0
• Outer-Ø ca.mm ± 10%: 36,3
• Nominal voltage UL: 5 kV 100%,133%, 8 kV 100%,133%, 15 kV 100%,133% 25 kV 100%,133% 35 kV 100%,133%
• Temperature range UL: operating: up to +105°C, emergency overload: up to +140°C, On short-circuit: up to +250°C
• Min. bending radius: 12 x d
• Cable Weight approx Lbs/Mft: 1443
• Part Number: 48320Y7L010A4C

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color