Product Information

Specification

2/0 AWG DLO Diesel Locomotive Cable RHH/RHW HDFPC 2KV

Applications:

HDFPC-DLO is a 2KV flexible power cable with a variety of possible applications such as but not limited to: Drilling rigs, railroad
and transit car wiring, mining and other industrial equipment, and as flexible motor leads and wind turbine applications. The cable
is suited for use in wet and dry areas, conduits, ducts, troughs, trays, and where superior electrical properties are desired. The
maximum continuous conductor temperature for normal operation is 90°C wet or dry. HDFPC-DLO is oil, heat, flame, abrasion,
and sunlight resistant. Approved for use per the NEC® as Type RHH/RHW-2 and per the CE Code as 2KV Type RW90. These cables are capable of operating continuously at the conductor temperature, not in excess of 90°C for normal operation in wet and
dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. Sizes 1/0 and Larger Rated For CT Use

CONSTRUCTION:

Conductors: Flexible Stranded Rope-Lay Class I Tinned Copper per ASTM B33 and B172
Binder Tape: Mylar Tape
Insulation: 2 layers Thermoset Ethylene Propylene Diene Monomer / Thermoset Chlorinated Polyethylene (EPDM/CPE)

Also Known As:

Diesel Locomotive Cable, DLO Cable, DLO Wire, Locomotive Cable, Type DLO Cable, DLO, DLO Welding Cable, DLO Heavy-Duty Cable, ROYAL DLO Cable

Standard:

• ASTM B3 - Soft or Annealed Copper
• ASTM B33 - Tinned Soft or Annealed Copper
• B172 - Rope-Lay-Stranded Copper Conductors Having Bunch Stranded Members
• UL Subject 2806 - Type HDFPC-DLO
• UL 44 - Type RHH/RHW-2
• CSA C22.2 No. 38 - Type RW90. (#12 and #10 AWG are not RW90)
• MSHA - P-07-KA100013
• IEEE 1202/FT4 - Flame Test (70,000 Btu/hr Vertical Tray Test). #8 and larger CSA. 1/0 and larger UL
• UL 1685 - Vertical-Tray Fire-Propagation and Smoke-Release Test
• ICEA S-95-658 (NEMA WC70) Power cables rated 2000 volts or less for the distribution of electrical energy

Specifications:

Part No: 167022
Size: 2/0 AWG
Conductor Strands: 342/#24
Diameter: 0.405 Inches
EPDM Layer: 0.080
CPE Layer: 0.045
Nominal Overall Diameter: 0.690
Weight Lbs/1000ft: 558 lbs
Bend Radius: 5.76

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color