Allowable Ampacity for 16 AWG 19C Solid Bare Copper Tape Shielded PVC NYCY 0.6/1KV Power Low Voltage Cable: 100 Amps

About:

The "16 AWG 19C Solid Bare Copper Tape Shielded PVC NYCY 0.6/1KV Power Low Voltage Cable" is a specific type of electrical cable designed for low voltage power applications.

Also Known As:

This cable may be referred to using different nomenclature in various regions or by different manufacturers, but the key characteristics (16 AWG, 19C, solid bare copper, tape shielded, PVC, NYCY, 0.6/1KV) are consistent. It's a low voltage power cable designed for secure and efficient power distribution.

Application:

Power cables for energy supply are installed in open air, in underground, in water, indoors and in cable ducts, power station, for industry and distribution boards as well as in subscriber networks, where mechanical damages are not to be expected.

Standards:

• Voltage Rating: Designed for 0.6/1KV applications, meaning it's suitable for low voltage scenarios.
• Electromagnetic Compatibility: The tape shielding offers protection against electromagnetic interference, ensuring stable operation of sensitive equipment.
• Safety Standards: Likely meets international and national safety standards for electrical wiring, including but not limited to IEC (International Electrotechnical Commission) standards, VDE (German Association for Electrical, Electronic & Information Technologies), and possibly others relevant to low voltage power cables.

Construction:

• Conductor: Solid red copper conductor Cl.1, acc. to IEC 60228 DIN VDE 0295
• Insulation: PVC type DIV4
• Colour cores: : acc. to DIN VDE 0293-308, HD 308 S2 from 6 cores black cores with consecutive numbers acc. to EN 50334; green-yellow earth-wire from 3 cores
• Stranding: Cores stranded concentrically
• Inner sheath: Filler compound
• Screen: Red copper wires + red copper tape
• Outer sheath: Black (RAL 9005), PVC type DMV5

Features:

• According to DIN VDE 0276 part 603.1, HD 603 S1 and IEC 60502-1
• 7 cores and above cc. to DIN VDE 0276 part 627, HD 627 S1and IEC 6050
• UV resistance

Specifications:

• No. of cores x cross section n x mm²: 19 X 1,5 / 4
• AWG no.: 19
• Outer-Ø ca.mm ± 10%: 23
• Copper Weight kg/km: 320
• Nominal Voltage: Uo/U 0,6/1 kV
• Test voltage: 4 kV
• Temperature range: Fixed laying: - 40°C up to + 70°C, Flexible application: - 5°C up to + 50°C
• Max short circuit temperature: + 160° C
• Min. bending radius: Single core: 12 x d, Multi cores: 15 x d
• Max. Tensile Stress: 50 N/mm²
• Cable Weight approx. kg/km: 690
• Part Number: 46200G71190M15