Product Information

Specification

12 AWG 4C Bare Copper Unshielded Wrap XLPE PVC U-1000 R2V 0.6/1KV Low Voltage Cable

Allowable Ampacity for 12 AWG 4C Bare Copper Unshielded Wrap XLPE PVC U-1000 R2V 0.6/1KV Low Voltage Cable: 100 Amps

About:

The U-1000 R2V cable features bare copper conductors and is unshielded. It uses cross-linked polyethylene (XLPE) for insulation, providing excellent electrical properties and resistance to heat, chemicals, and environmental conditions. The outer sheath is made of polyvinyl chloride (PVC), enhancing its durability and protection against physical abrasions and moisture. The cable is rated for a voltage of 0.6/1 kV, making it suitable for low voltage applications.

Also Known As:

• XLPE insulated PVC sheathed cable
• Low voltage copper cable
• Unshielded copper XLPE cable

Application:

For use in industrial sites and the upright columns of buildings. particulary suited in cases of high resistance to solar radiation and athmospheric agents is required good resistance to low temperatures and chemical agents. Can be used without additional mechanical protection in the open air, fixed to walls or in raceways, inside walkways, and in empty in constructions in general. can be laid underground with mechanical protection constucted from slab, tiles, or bricks. It is no racomended to lay this cable in ground flooded for more than two months for year. With appropriate mechanical protection it can be use in areas subject to risk of explosion, but in this case the permitted current load is reduced by 15% It can be used in ambient temperatures down to - 25°.

Standards:

• International Electrotechnical Commission (IEC) standards, ensuring global compliance and performance criteria.
• European standards, possibly including EN 50525-3-11, which specifies requirements for cables of rated voltages up to and including 450/750 V.
• National standards that may apply in the country of use, ensuring the cable meets local codes and installation practices.

Construction:

• Conductor: solid or stranded red copper conductor Cl. 1 up to 4 mm2 Cl. 2 from 6 mm2 , acc. to IEC 60228
• Insulation: XLPE compound
• Colour cores: 1 core: black
                           2 core: blue-brown
                           3 cores: brown-black-blue (1,2/2,5 mm2) or brown-black-gray (4 mm2)
                           3G cores: Y/G-blue-brown
                           4 cores: blue-brown-black-gray
                           4G cores: brown-black-gray-Y/G
                           5 cores: brown-blue-grey-black-black
                           5G cores: Y/G-blue-brown-black-gray
• Wrapping: non fibrous and not hygroscopic filler
• Outer sheath: black (RAL 9005)*,PVC compound *single-core cables and multi-cores cables over 5 cores black outer sheath. From 2 up to 5 cores black outer sheath with colored strip

Features:

• according to IEC 60502-1 and NF C 15-100
• according to NF XP C32-321

Specifications:

• AWG no: 12
• No.of cores x cross section n x mm2: 4G4
• Outer-Ø ca.mm ± 10%: 14,5
• Nominal voltage: Uo/U 0,6/1 kV
• Test voltage: 4 kV
• Copper weight kg/km: 153,6
• Temperature range: - 25 oC up to + 90 oC
Min. installation temp.: - 10 oC
• Min. bending radius: 6 x d
• Cable weight approx. kg/km: 280
• Part Number: 46230G72041M40

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color