10 AWG 3C Solid THHN/THWN-2 Copper Wire 600V Multi-Conductor Barrel Drum Package

10 AWG 3C Solid THHN/THWN-2 Copper Wire 600V Multi-Conductor Barrel Drum Package

Applications:

The SIMpull BARREL Cable Drum reduces the physical effort associated with material handling, setup, and pulling when compared to conventional wire pulling methods. Designed to simplify branch circuit installations, the SIMpull BARREL Cable Drum contains up to 7 paralleled conductors per BARREL (homerun), increasing productivity and reducing the potential for injury while avoiding broken spools, excess material handling and scrap. SIMpull BARRELTHHN/THWN-2 copper conductors are primarily used in conduit for branch circuits in commercial or industrial applications as specified in the National Electrical Code and other applicable codes and standards. Voltage for all applications is 600 volts. SIMpull BARREL THHN/THWN-2 copper conductors are designed to be installed without the application of a pulling lubricant.

These conductors have multiple ratings depending upon the product application. Allowable temperatures are as follows:
- THHN or T90 Nylon- Dry locations not to exceed 90°C
- THWN-2- Wet or dry locations not to exceed 90° C or locations not to exceed 75°C when exposed to oil
- TWN75- Wet locations not to exceed 75°C
- MTW- Wet locations or when exposed to oil at temperatures not to exceed 60°C or dry locations not to exceed 90°C (with ampacity limited to that for 75°C conductor temperature per NFPA 79)
- AWM- Dry locations not to exceed 105°C only when rated and used as appliance wiring material 

The SIMpull Barrel Cable Drum Cable Drum is ideal for job sites with longer runs and home-run pulls. Designed to simplify branch circuit installations, the SIMpull BARREL Cable Drum contains up to 7 paralleled conductors per BARREL, increasing productivity and reducing the potential for injury while avoiding broken spools, excess material handling, and scrap. Easy payoff directly out of the package, requiring less setup and effort to pull vs conventional wire-pulling methods. Copper 600 Volt THHN/THWN-2.

Also Known As:

10 AWG 3C THHN THWN-2 copper wire 600V, 600V THHN multi conductor wire, 10 AWG 3C THHN THWN-2 wire drum package, 10 AWG 3C THHN copper wire barrel spool, THHN/THWN-2 600V bulk wire, multi conductor THHN wire drum, 10 AWG 3C THHN THWN-2 copper cable roll, barrel package THHN THWN wire, industrial THHN wire 600 volt, 10 AWG 3C THHN THWN-2 copper drum cable.

Standards:

• ASTM B3 Soft or Annealed Copper Wire
• ASTM B787 19 Wire Combination Unilay-Stranded Copper Conductors
• UL 83 Thermoplastic Insulated Wires and Cables
• NMX-J-010-ANCE Thermoplastic insulated wires and cables
• NOM-063-SCFI Electrical Products – Conductors – Safety Requirements

Construction:

Conductor:
Solid soft drawn annealed bare copper per ASTM B3 or combination-unilay Class C stranded soft drawn annealed bare copper per ASTM B787

Insulation: 
Heat and moisture resistant PVC insulation in various colors

Sheath: 
Nylon jacket utilizing SIMpull Technology

For information about our SIMpull Barrel Cable Drum please visit us at:
SIMpull Barrel

Features:

• Easier pulling with SIMpull NoLube wire jacket.
• Stationary package design to further reduce pulling tension.
• Designed to help lower potential for lifting/handling/pulling injuries.
• Patented parallel construction to reduce material handling and setup.
• Avoid broken spools and spool over-turn.

Specifications:

• Size: 10 AWG
• Number of Conductors: 3
• Number of Strands:  Solid
• Diameter Over Cond. inch: 0.101
• Insulation Thickness: 20
• Insulation Color : BK, WE/BK, GN 
• Jacket Thickness:  5
• Approx. OD inch:  0.449
• Copper Weight lb / 1000ft: 94
• Approx. Weight lb / 1000ft: 110
• Min Bending Radius  inch:1.8 
• DC Resistance @ 25°C Ω /1000ft: 1.040
• AC Resistance @ 75°C Ω /1000ft: 1.253
• Allowable Ampacity 75°C: 35
• Allowable Ampacity 90°C: 40