1/0 AWG 3C HVTECK Aluminum 320 mil TRXLPE TS AIA 25kV 133% IL PVC Jacket CSA

1/0 AWG 3C HVTECK Aluminum 320 mil TRXLPE TS AIA 25kV 133% IL PVC Jacket CSA

Application:

 The 25kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.

Also Known As:

1/0  AWG 3C HVTECK Aluminum 3/C TRXLPE cable, 320 mil 3 conductor 25kV cable, TRXLPE 25kV aluminum cable, Aluminum 3 conductor PVC jacket 25kV, HVTECK 3 conductor TRXLPE wire, 25kV TRXLPE AIA aluminum cable, 320 mil 3/C TRXLPE 25kV wire, 1/0 AWG 3C Aluminum 25kV TRXLPE CSA cable, 3 conductor 25kV TRXLPE cable, 1/0  AWG 3C HVTECK 320 mil PVC jacketed wire.

Construction:

• Conductor: Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
• Conductor Shield: Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
• Insulation: 320 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level
• Insulation Shield: Strippable semi-conducting cross-linked copolymer
• Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
• Filler: Interstices filled with non-hydroscoping/non-wicking fillers
• Grounding Conductor: Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8
•  Binder: Polypropylene tape
• Inner Jacket: PVC inner jacket
• Armour: Aluminum Interlocked Armour (AIA)
• Overall Jacket: Black Polyvinyl Chloride (PVC) Jacket

Standards:

• ASTM B801 Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
• ASTM B836 Compact Rounded Stranded Aluminum Conductors
• CSA C22.2 No. 174 Cables in Hazardous Locations
• CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
• CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV
• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
• CSA HL - for Hazardous Locations rating
• CSA SUN RES - for Sunlight Resistant rating
• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
• ICEA T-29-520 Flame Test (210,000 BTU/Hr)
• IEEE 383 Flame Test (70,000 btu)
• IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
• FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)

Specifications:

• Size: 1/0 AWG 
• Number of Strands: 19
• Diameter Over Conductor (inch):  0.336
• Diameter Over Insulation (inch):   1.014 
• Insul. Thickness mil:  320
• Diameter Over Insulation Shield (inch):  1.074
• Ground No. x AWG:  6
• Inner Jacket Thickness (mil): 110
• Diameter Over Armor (inch): 2.939
• Overall Jacket Thickness mil :  75
• Approx. OD inch : 3.089
• Approx. Weight (Lbs/1000'Ft):  3577
• Min Bending Radius (In):   21.6
• DC Resistance @ 25°C Ω /1000ft:   0.168
• AC Resistance @ 90°Ω /1000ft:   0.211
• Inductive Reactance @ 60HzΩ/1000ft:    0.049
• Allowable Ampacity In Air 90°C Amp:  181
• Allowable Ampacity Directly Buried 90°C Amp:  200