Product Information

Specification

16 AWG 2P Stranded BC Shield Individual Al Tape PE Armour PVC RE-2Y(St)YRY PiMF Instrumentation Cable

Allowable Ampacity for 16 AWG 2P Stranded BC Shield Individual Al Tape PE Armour PVC RE-2Y(St)YRY PiMF Instrumentation Cable:100 Amps

About:

This cable is specifically engineered for instrumentation and control purposes in industrial applications. It features a polyethylene (PE) armored and polyvinyl chloride (PVC) sheathed construction with stranded bare copper (BC) conductors and individual aluminum (Al) tape shielding. The PiMF (Pairs in Metal Foil) design signifies that each pair of conductors is individually shielded, providing superior interference protection.

Also Known As:

• Polyethylene Armored PVC Sheathed Instrumentation Cable
• Stranded Bare Copper PE Armored Instrumentation Cable
• Aluminum Tape Shielded Instrumentation Cable

Applications:

These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, natural gas and petroleum plants. With blue sheath it is suitable for intrinsically safe systems. these cables are for indoor/outdoor installation, in dry and wet locations, on rack trays, in conduits.

Standards:

• International Electrotechnical Commission (IEC) specifications for instrumentation cables
• Relevant national or international standards for fire resistance, signal transmission, and mechanical durability
• Compliance with RoHS (Restriction of Hazardous Substances) directives

Construction:

• Conductor: stranded red copper conductor Cl. 2, acc. to IEC 60228, DIN VDE 0295
• Insulation: PE type 2YI1
• Colour cores: white-black, with black progressively numbered
• Stranding: conductors twisted in pairs, PiMF laid up in layers of optimum pitch
• Wrapping: (PiMF) Polyester tape above the pair, AL-PES tape over solid tinned copper drain wire, 0,60 mm
• Screen Individual: electrostatic screen of plastic and aluminium tape + tinned drain wire
• Overall: electrostatic screen of plastic and aluminium tape + tinned drain-wire
• Inner sheath: PVC compound
• Armour: galvanized steel wires
• Outer sheath: black (RAL 9005), or blue (RAL 5015), PVC type YM1

Features:

• fl: on request
• standard TS/DIN EN 50288-7
• Insulation thickness: mm 0,50 0,75 1 1,3 1,5
                                         mm 0,40 0,40 0,40 0,45 0,45
• Conductor resistance: mm 0,50 0,75 1 1,3 1,5
                                           Ohm/km 36,7 25 18,5 14,2 12,3
• Insulation resistance: min. 5 GOhm x km
• Mutual capacitance: max. 120 pF/m
• Capacitance unbalance: (1 kHz): max. 500 pF/500 m
• L/R (oran-ratio) (max.): mm2 0,50 0,75 1.0 1,3 1,5
                                             mm2 25 25 25 40 40

Specifications:

• AWG No: 16
• No. of pairs x cross section n x mm2: 2x2x1,5
• Outer-Ø ca.mm ± 10%: 18
• Nominal voltage: Uo/U 300/500 V
• Test voltage: 2 kV
• Temperature range: - 30 o C up to + 70 o C
• Copper weight kg/km: 72
• Cable weight approx. kg/km: 525
• Part Number: 47130D.X022M15

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color