35 kv Hybrid Version Polymer Line Post Insulator For Distribution PL035H

Product Information

Specification

About

GAMMA Polymer Distribution Line Post Insulators provide superior support and electrical insulation on overhead distribution lines, conductor jumpers or leads. They can be installed horizontally or vertically on metal, concrete or wooden structures.

The core of the insulator is made of a corrosion resistant epoxy resin fiberglass rod constructed exclusively for electrical and mechanical applications. Housing and sheds consist of a one-piece injection molded composite material that chemically bonds to the core rod. This creates a water-tight seal between the polymer and the rod that is impervious to moisture penetration.

The composite material itself is made of silicone rubber with additives to enhance performance in polluted enviroments and under a variety of conditions such as rain, ice, sand and salt.

The line end of GAMMA's Polymer Line Post Insulator is available in two configurations: Hot Dip Galvanized Iron Casting or Porcelain. The porcelain end fitting provides superior leakage distance and reduced unit weight. Both are sealed to prevent water from penetrating to the fiberglass core

GAMMA Polymer Line Post Insulators are designed, manufactured and tested according to ANSI standard C29.18.

Specification:

Arcing distance : 11-9/16"
Leakage distance : 30-3/4"
SCL : 2,800
Maximum density cantilever load : 1,348
Tensile strength : 3,000
Rated voltage : 35
Low-frequency dry flashover : 130
Low-frequency wet flashover : 95
Critical impulse flashover, positive : 210
Critical impulse flashover, negative : 230
Low-frequency test voltage, RMS to ground, kV : 10
Maximum RIV at 1,000 KHZ, μν : 4
Center hole nominal thread size : 3/4"

Note 1 : Dimensions in inches.
• Combines a ceramic head and silicone elastomer housing properties superior leakage distance and reduced unit weight.

• Housing: High voltage silicone - High temperature vulcanized (HTV).

• Fittings: Hot dip galvanized steel.

Images are only for References