Product Information

Specification

10 XHHW-2 Copper Building Wire

Description:

XHHW-2 copper conductors are primarily used in conduit, recognized raceways, and branch circuit wiring, as outlined in the National Electrical Code (NEC). These conductors are suitable for wet and dry locations, with a maximum operating temperature of 90°C. They have a voltage rating of 600 volts. Certain XHHW-2 conductors may be used in health care facilities under NEC Section 517.160 if they meet the dielectric constant requirement of less than 3.5.

Also Known As:

10 XHHW-2 Copper Building Wire, 10 XHHW Cable, 10 XHHW Service Wire, 10 XHHW Copper Wire, 10 CU Building Wire, 10 Black Stranded CU SIMpull XHHW-2 Wire, Southwire 11294604, Southwire Wire, 10 AWG XHHW Building Wire, 10 Gauge Stranded Copper XHHW-2 Wire, 10 Stranded Copper XHHW-2 Wire.

Common Uses of 10 AWG Copper XHHW-2 Wire

• 30A branch circuits in residential and commercial buildings
• 35A branch circuits where the 75°C ampacity is permitted, such as conductors installed in conduit.
• 40A circuits when used per NEC adjustments in specific applications, such as feeder circuits in low-load conditions
• Feeder wiring for appliances, lighting, and power distribution
• HVAC and refrigeration unit wiring
• Motor leads for small to medium-sized motors in wet or dry environments
• Power distribution in conduit and raceways for 600V-rated applications

Construction:

Conductor:

• Material: Annealed bare copper, concentrically stranded
• Properties: High electrical conductivity, resistant to moisture, compression, pressure, and heat

Insulation:

• Material: Cross-linked polyethylene (XLPE)
• Properties: Flame-retardant, resistant to abrasion, chemicals, corrosion, and moisture
• Color: Black (standard)

Standards & Compliance:

• ASTM B3 – Soft or Annealed Copper Wire
• ASTM B8 – Concentric-Lay-Stranded Copper Conductors
• UL 44 – Thermoset-Insulated Wires and Cables
• ICEA S-95-658 (NEMA WC70) – Power Cables Rated 2000V or Less
• Federal Specification A-A-59544
• NMX-J-451-ANCE – Thermoset insulated wires and cables
• NOM-063-SCFI – Electrical Conductors Safety Requirements
• Buy American & Buy America Act (BAA) Compliant (49 U.S.C. § 5323(j) and 49 C.F.R. part 661)

Specifications:

• Size AWG: 10
  Weight per 1,000 ft: 39 lbs
  Outside Diameter: 0.173 inches
  Number of Strands: 7
  Jacket: XLPE
  Min Bending Radius: 0.7 inches
  Max Pull Tension: 83 lbs
  Insulation Thickness: 30 mils
  Allowable Ampacity At 60°C: 30 Amp
  Allowable Ampacity At 75°C: 35 Amp
  Allowable Ampacity At 90°C: 40 Amp
  Southwire Part (SimPull®): 11294604

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color