6/4 SOOW Black Portable Power Cable 600V UL CSA

Allowable Ampacity For 6/4 SOOW Cord UL/CSA- Black: 45 Amps

Applications:

SOOW is a flexible, water- and weather-resistant, portable cable built for demanding environments. Its oil-resistant jacket and EPDM insulation offer excellent protection against abrasion, chemicals, sunlight, and moisture. The cable remains intact even when exposed to hot surfaces, making it ideal for compressors, industrial machinery, push-button remotes, control systems, and water purification equipment. Commonly used in mills, marinas, mines, and industrial, commercial, and residential facilities, SOOW cable is valued for its durability and flexibility. It is rated for 600 volts and performs reliably in temperatures from -40°C to 90°C, maintaining flexibility in both hot and cold conditions.

Also Known As:

6/4 SOOW Portable Power Cable, 6/4 SOOW, 6/4 SOOW Power Cord, 6/4 SOOW Portable Cord, 6/4 SOOW Service Cord, 6/4 SOOW Service Cable, 6/4 SOOW Cord, 6/4 SOOW Cable, 6/4 SOOW Wire, 6/4 SOOW Flexible Power Cable, 6/4 SO Cord, 6/4 SOOW Control Cable.

Particular Applications of 6/4 SOOW Cable:

In applications up to 45 amps, the 6/4 cable is used for:

• Single-phase 240V systems requiring two hots, neutral, and ground

• Dual 120V circuits sharing a neutral and ground

• High-powered portable tools and industrial equipment

• Temporary power distribution for job sites and events

• HVAC systems, pumps, and mid-sized motors

• Battery chargers and mobile generators

• Control and lighting systems in harsh indoor and outdoor environments

Standards:

• UL 62
• CSA C22.2 No. 49
• Flame test meets FT2, and MSHA
• OSHA accepted
• NEC Article 700 permitted use for specific applications
• NFPA 70 permitted use in Hazardous Locations Classes I, II, III, Divisions 1 & 2 as
  outlined in Articles 501, 502, 503 section 140

Construction:

Conductor: 

Stranded, bare, and fully soft annealed copper conductor, Class K per ASTM B174. Suitable for harsh conditions. 

Insulation:

SOOW Cord UL/CSA has an EPDM l insulation. EPDM is an initial for Ethylene Propylene Diene Monomer. EPDM is a synthetic rubber that has the ability to be deformed into the required shape. It is also elastic with an excellent tensile strength of about 1000 PSI (pounds per square inch). Tensile strength gives it good resistance to breaking, even under tension. It has 300% flexibility that enables it to regain its original shape and size after a stretch.

EPDM is a good insulator due to its excellent resistance to severe weather, acids, alkalis, aging, water, ozone, sunlight, and oxygen. This excellent resistance ensures the conductor remains effectively functional throughout its service life with no physical or mechanical distraction.

Jacket:

Carolprene jacket has superior mechanical strength and excellent resistance to abrasion, UV, weather, moisture, oil, acids.

Specification:

• Gauge: 6 AWG 
• No. Conductors: 4
• Stranding: 133/27  
• Insulation Wall, Nom OD Inches: 0.060"" 
• O.D. Inches: 0.845""
• New Weight lb/1000FT: 830 Lbs
• Amps: 45
• Volts: 600