Product Information

Specification

2 AWG 1C EPR/CPE Power Cable 600V

Application:

• Cable trays
• Indoors or outdoors
• Raceways
• Direct Burial
• Underground ducts
• Aerial installation when
• Wet or dry locations lashed to a messenger
• These 600 Volt Power and Control Cables are recommended for use in all low voltage circuits where continuity of service is the prime consideration. These cables may also be installed in cable tray (size 1/0 AWG and larger per NEC 318-3).

Scope:

• Cable sizes 1/0 AWG and larger pass the Vertical Tray Flame Test requirements of UL 1581 for use in cable tray. This cable passes the ICEA T-29-520 210,000 Btu/hr. Vertical Tray Flame Test (sizes 1/0 AWG and larger), and also passes the IEEE 383-1974 Vertical Tray Flame Test and IEEE 1202-1991 Vertical Tray Flame Test (sizes 1/0 AWG and larger). This cable has extreme heat resistance; 90°C continuous rating, wet or dry, 110°C hot spot rating, 130°C emergency overload rating and 250°C short circuit rating; UL listed.

Also Known As:

2 AWG 1C Power Cable, Direct Burial Cable, 2 AWG 1C EPR/CPE Power Cable, 600V 2 AWG 1C EPR/CPE Power Cable, Tray Cable.

Construction:

Conductors: 

The conductor shall be uncoated copper Class B stranded per ASTM B-8; solid per ASTM B-3.

Insulation:

The insulation meets or exceeds all requirements of ICEA S-68-516, NEMA WC-8 and UL Standards 44 and 854.

Specifications:

• Size: 2 AWG
• No. of Conductor: 1
• No. of Strands: 7
• Composite Insulation Thickness (Mils): 75 
• Approx. O.D. (In): 0.45  
• NEC Ampacity+ 90°C Wet (1): 130 
• NEC Ampacity+ 75°C Wet (1): 115
• Approx. Net Weight lbs./Mft.: 264

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color