Product Information

Specification

19 AWG 12P Stranded BC Shield Individual Al Tape PE PVC RE-2Y(St)Y PiMF/TiMF 300/500V Instrumentation Cable

Allowable Ampacity for 19 AWG 12P Stranded BC Shield Individual Al Tape PE PVC RE-2Y(St)Y PiMF/TiMF 300/500V Instrumentation Cable:100 Amps

About:

The RE-2Y(St)Y PiMF/TiMF is a type of instrumentation cable designed for various applications. It features stranded bare copper conductors shielded with both individual aluminum tape and an overall aluminum tape. The insulation material is typically made of PE (Polyethylene), and the outer sheath is commonly PVC (Polyvinyl Chloride). This cable is suitable for use in environments where electromagnetic interference (EMI) is a concern, providing reliable signal transmission with a voltage rating of 300/500V.

Also Known As:

• Instrumentation cable
• RE-2Y(St)Y cable
• PiMF/TiMF cable
• Shielded instrumentation cable
• PE (Polyethylene) insulation cable

Applications:

These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, natural gas and petroleum plants. With blue sheath it is suitable for intrinsically safe systems. these cables are for indoor/outdoor installation, in dry and wet locations, on rack trays, in conduits.

Standards:

• IEC (International Electrotechnical Commission),
• IEEE (Institute of Electrical and Electronics Engineers)

Construction:

• Conductor: stranded red copper conductor Cl. 2, acc. to IEC 60228, DIN VDE 0295
• Insulation: PE type 2YI1
• Colour cores: PAIR: black, white TRIAD: black, white, red
• Stranding: conductors twisted in pairs/triads
• Screen Individual: electrostatic screen of plastic and aluminium tape + tinned drain-wire
• Overall: electrostatic screen of plastic and aluminium tape + tinned drain-wire
• Outer sheath: blue (RAL 5015) or black (RAL 9005), PVC type YM1

Features:

The RE-2Y(St)Y PiMF/TiMF stranded BC shield individual Al tape PE PVC 300/500V instrumentation cable is designed for reliable signal transmission in industrial settings. It features a stranded bare copper (BC) conductor for flexibility and effective conductivity. Each conductor is individually shielded with aluminum tape (Al tape) to minimize electromagnetic interference, ensuring signal integrity. The polyethylene (PE) insulation and polyvinyl chloride (PVC) jacket provide robust protection against environmental hazards and mechanical stresses. The cable is rated at 300/500V, making it suitable for a wide range of instrumentation applications.

Specifications:

• AWG No: 19
• No. of pairs/triples x cross section n x mm: 12x2x0,75
• Outer-Ø ca.mm ± 10%: 16,5
• Nominal voltage: Uo/U 300/500 V
• Test voltage: 2 kV
• Temperature range: - 30 OC up to + 70 OC
• Copper weight kg/km: 235,2
• Cable weight approx. kg/km: 475
• Part Number: 47100D.X122M07

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color