16 AWG 2C Copper FR-XLPE CPE Jacket Control Cable 600V

16 AWG 2C Copper FR-XLPE CPE Jacket Control Cable 600V

Applications:

The 600 Volt control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. UL rated constructions can be used in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. UL rated constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10

Also Known As:

16 AWG 2C 600V Control Cable, 16 AWG 2C FR-XLPE Insulated Control Cable, 16/2 CPE Jacketed Control Cable Flame-Retardant XLPE Control Cable, Industrial Control Cable XLPE/PVC Control Cable, Type TC-ER Cable, UL 1277 Cable, 600 Volt Instrumentation Cable.

Construction:

Conductor:
7 strands class B compressed bare copper per ASTM B3 and ASTM B8

Insulation:
Flame Retardant Cross Linked Polyethylene (FR-XLPE), 30 Mils thick for all cable sizes

Filler:
Polypropylene filler on cables with 5 or less conductors

Binder:
Polyester flat thread binder tape applied for cables with more than 5 conductor

Rip Chord:
Rip chord for ease of jacket removal

Overall Jacket:
Chlorinated Polyethylene (CPE) Jacket

Specification:

• Size: 16 AWG 
• Number of Conductors: 2
• Diameter Over Conductor (inch):  0.057
• Insulation Thickness (Mil):  25
• Jacket Thickness (Mil): 45
• Approx. OD (In):  0.308
• Copper Weight (Lbs/1000'Ft): 16
• Approx. Weight (Lbs/1000'Ft): 47
• DC Resistance Ω /1000ft: 4.180 
• AC Resistance @ 90°C Ω /1000ft:  5.266
• Min Bending Radius (In):  1.2