Product Information

Specification

Also known as:

Single-Phase Transformers, Pad-Mounted Transformer, Power Distribution Solutions, Oil-Immersed Technology.

About:

Pad-mounted transformers for solar applications have their active part immersed in dielectric oil and use dead-front terminals, which means they do not have exposed energized parts and are located inside a cabinet, with safety-sealed compartments, with doors and locks. both for the low voltage side and for the high voltage side, which makes it a very safe device. In addition, the pad mounted transformer has built-in connection, protection and maneuver elements typical of a substation that protect the equipment.

Notes: This product can be customized as per customer requests

Specification:                        

Type: Radial or Loop Feed

Capacity: From 10 kVA up to 500 kVA

Phases: One

Tension: Up to 36 kV

Bil: Up to 200 kV

Winding Material: Aluminum or copper

Cooling Class: ONAN

Frequency: 60 0 50 Hz

Tap changer: 2, 2.5% or according to customer requirements.

Temperature Raise: Typically 65/65°C, or according to customer requirements.

K Factor: K1, K2, K4, K6, K9, K13, K20 or according to customer requirements.

Type Of Efficiency: Class A, B, C o D; DOE

Type Of Insulation: Mineral or Biodegradable

Tank: 

Manufactured with cold rolled and hot rolled sheet steel with a design that allows it to withstand internal pressure and mechanical stress. Or with stainless steel.

Paint System: 

Special electrostatic paint of great resistance and durability, especially for outdoors and corrosive environments.

Gaskets: 

Highly durable and compatible with dielectric oil, to guarantee the life of the equipment.

Static Shield:

Special electrostatic screen, to eliminate high frequency pulses, with a design that minimizes losses due to the Eddy effect.

Accessories: 

• Dead front type high tension bushings (wells, inserts, elbows).
• Low tension bushings
• Support for parking hubs in HV.
• Pressure relieve valve.
• Oil level
• Drain valve with sampling device.
• Ground connection
• Lifting and fixing devices
• Nameplate made of high-strength anodized aluminum
• Tap switch
• High and low voltage cabinets with doors and locks

Standard:

IEEE C57.12.34, IEEE C57.12.28, IEEE C57.12.29, IEEE C57.12.38, NTC 3997, NTC 5074 and RETIE.