Product Information

Specification

6-6-6-6 SER Copper Service Entrance Wire Cable

Allowable Ampacity at 60° C: 55

Allowable Ampacity at 75° C: 65

Allowable Ampacity at 90° C: 75

Applications:

6-6-6-6 Copper SER cable is a service entrance cable with a reinforcement tape designed for use where service entrance cables are permitted. It is most commonly used to connect the service drop to the meter base and from the meter base to the distribution panelboard.

This cable is suitable for dry locations with an operating temperature not exceeding 90°C and has a voltage rating of 600V.

This particular 6-6-6-6 size is suitable for:

• Main panel feeds in residential and light commercial buildings.
• Subpanel feeds in homes, garages, and small offices.
• Power distribution from meter bases to panelboards.
• Feeding large electrical appliances, such as HVAC systems and electric water heaters.

Also Known As:

6-6-6-6 Copper SER Service Entrance Cable, 6-6-6-6 Reinforcement Tape Service Entrance Cable, 6-6-6-6 SER Cable, 6-6-6-6 SER Service Cable, 6-6-6-6 Copper Service Cable, 6-6-6-6 Round Service Entrance Cable.

Construction:

Conductor:

The "6-6-6-6" designation means this SER cable contains four conductors, each with a 6 AWG (American Wire Gauge) size:

• Three-phase conductors (hot wires) for carrying current.
• One bare neutral conductor for returning current.
• The conductors are cabled together with a bare copper neutral conductor.
• A reinforced binder tape holds the assembly together.

All conductors are made of annealed soft-drawn copper, providing high conductivity, durability, and resistance to corrosion.

Insulation:

Each insulated conductor is coated with XHHW-2 cross-linked polyethylene (XLPE) insulation, which provides:

• High heat resistance (rated up to 90°C).
• Moisture resistance for dry locations.
• Excellent dielectric strength and resistance to chemicals and abrasion.

Jacket:

SE cable is jacketed with gray sunlight-resistant polyvinyl chloride (PVC). This dielectrically strong insulation is resistant to corrosion, abrasion, chemicals, and mechanical impact.

Standards:

• ASTM- All applicable standards
• UL Standard 44 for XHHW-2 conductors
• UL Standard 83 for THHN/THWN conductors
• UL Standard 854
• Federal Specification A-A-59544
• National Electrical Code, NFPA 70. 2011 Edition
• RoHS/ REACH

Specifications:

• Size AWG: 6-6-6-6
• Weight per 1,000 ft: 424 lbs
• Outside Diameter: 738 mils
• Conductors: Annealed Soft Copper
• Stranding: Phase & Neutral Conductors: 7
• Stranding: Equipment Ground Conductor: 7
• Insulation: XLPE
• Jacket: PVC

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color