Product Information

Specification

Allowable Ampacity for 2/0 AWG 1C Bare Copper Unshielded EPR PVC 5KV 100% Gaalflex Type MV-105 Cable: 100 Amps

About:

This cable is a medium voltage power cable. It is designed with a 2/0 AWG (American Wire Gauge) single conductor, using bare copper. It's unshielded and insulated with Ethylene Propylene Rubber (EPR), covered with a Polyvinyl Chloride (PVC) jacket. The "5KV" indicates a 5 kilovolt rating, and "100%" may refer to the insulation level or coverage. "Type MV-105" specifies its suitability for medium voltage applications up to 105 degrees Celsius.

Also Known As:

This type of cable might be known by different names, depending on the manufacturer or the context in which it's used. However, the specific characteristics like 2/0 AWG, bare copper, unshielded, EPR, PVC, and its voltage rating are consistent identifiers.

Application:

It's typically used in power distribution and transmission for industrial, commercial, and utility settings. Suitable for both dry and wet locations, it can be used in aerial, conduit, open tray, and direct burial installations. It's particularly useful where medium voltage power is required, and in environments that demand high reliability and durability.

Standards:

• UL 1072
• ICEA S-97-682
• ICEA S-93-639

Construction:

• Conductor: Compacted concentric soft drawn bare copper Class B acc. to ASTM
• Inner semi-conductive layer: semi-conductive extruded thermosetting polymeric layer
• Insulation: Special rubber EPR compound
• Outer semi-conductive layer: semi-conductive extruded thermosetting polymeric layer
• Screen: Red copper tape
• Outer Sheath: Black (RAL 9005), special PVC compound

Features:

• Suitable for Direct buried, aerial installation, cable trays (CT)*, troughs or raceways *(CT use 1/0 AWG and larger)
• Suitable for wet or dry locations
• Sunlight resistant
• On request compressed or compacted stranded conductors
• On request compacted concentric stranded aluminium conductor Class B acc. to ASTM
• On request LLDPE*, CPE or Halogen-free insulation *(UL does not recognize LLDPE AS MV.105)
• On request red copper wires screen
• On request oil resistant outer sheath
• On request low coefficent PVC outer sheath
• On request acc. to CSA C68.10 (FT4 250 MCM and larger, -40°C cold impact and cold bend)
• acc. to AIEC CS-8
• RoHS approval

Specifications:

• Cross section AWG/MCM: 1x 2/0
• Outer-Ø ca.mm ± 10%: 20,1
• Nominal voltage UL: 5 kV 100%,133%, 8 kV 100%,133%, 15 kV 100%,133% 25 kV 100%,133% 35 kV 100%,133%
• Temperature range UL: operating: up to +105°C, emergency overload: up to +140°C, On short-circuit: up to +250°C
• Min. bending radius: 12 x d
• Cable Weight approx Lbs/Mft: 665
• Part Number: 4832027L010A2C

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color