HELUKABEL MULTIFLEX 512-C-PUR Drag Chain Cable

HELUKABEL MULTIFLEX 512-C-PUR Drag Chain Cable

Applications:

These specially screened drag chain cables offer application possibilities in areas where external high-frequency influences disturb pulse transmissions. They are used for permanently flexible applications in machine and tool construction, in robotics and on permanently moving machine parts for continuous use in multi-shift operations. With free movement, without tensile stress and without forced motion control capabilities, these cables have proven their reliable performance in drag chain applications. This highly flexible cable with gliding PP core insulation and cut-resistant low adhesive PUR outer sheath, guarantees an optimum service life and very high economic efficiency.
EMC = Electromagnetic Compatibility; in order to optimize EMC properties, we recommend a double-sided and all-round large contact area of the copper braiding. EMC properties, we recommend a double-sided and all-round large contact area of the copper braiding.

Also Known As:

MULTIFLEX 512-C-PUR MULTIFLEX PUR EMC Cable, HELUKABEL Drag Chain Cable (PUR), HELUKABEL Flexible Drag Chain Cable, HELUKABEL Flexible PUR Cable, HELUKABEL Oil-resistant Drag Chain Cable, HELUKABEL UV-resistant Drag Chain Cable, HELUKABEL High Flex PUR Cable, HELUKABEL High Mechanical Stress Cable, HELUKABEL Wear-resistant Drag Chain Cable, HELUKABEL Low Adhesion Cable, HELUKABEL Flexible EMC Cable, PUR Insulated Drag Chain Cable, Multi-conductor PUR Cable for Drag Chains, HELUKABEL High-Performance Drag Chain Cable

Technical Data:

PUR drag chain cable in alignment with DIN VDE 0285-525- 2-21 / DIN EN 50525-2-21

Temperature range
flexible -30°C to +80°C
fixed -40°C to +80°C

Nominal voltage
AC U0/U 300/500 V

Test voltage core/core
3000 V

Coupling resistance
at 30 MHz, approx. 250 Ohm/km

Minimum bending radius
flexible 7.5x Outer-Ø
fixed 4x Outer-Ø

Cable Structure:

• Copper wire bare, extra finely stranded acc. to DIN VDE 0295 Class 6 / IEC 60228 Class 6
• Core insulation: Special-PP
• Core identification acc. to DIN VDE 0293-334, black cores with consecutive labeling in white digits
• Protective conductor: starting with 3 cores,
G = with protective conductor GN-YE, in the outer layer,
x = without protective conductor
• Cores stranded in layers with optimally matched lay lengths
• Fleece wrapping over each stranding layer, from 4 mm² without fleece wrapping
• Inner sheath: TPE
• Fleece wrapping
• Screen: braided screen of tinned copper wires, approx. coverage 85%
• Fleece wrapping
• Outer sheath: Special grade of full polyurethane acc. to DIN VDE 0207-363-10-2 / DIN EN 50363-10-2 (compound type TMPU)
• Sheath colour: grey (RAL 7001)
• Length marking: in meters

Properties:

 • resistant to: oil, UV radiation, ozone, oxygen, weathering effects, hydrolysis, microbes, coolants, hydraulic fluids, acids, alkalis, greases, seawater and wastewater
• highly abrasion-resistant, notch-resistant, tear-resistant, cut-resistant, wear-resistant, low adhesion
• for outdoor use
• suitable for use in drag chains
• halogen-free
• the materials used during manufacturing are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers

Tests:

• oil-resistant acc. to DIN VDE 0473-811-404 / DIN EN 60811-404 / IEC 60811-404
• UV-resistant acc. to DIN EN ISO 4892-2
• weather-resistant acc. to DIN EN ISO 4892-2
• Alternate bending test: tested on approx. 10 million cycles
• certifications and approvals: EAC

Notes:

• the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
• please note "cleanroom qualification" in your order
• for use in energy supply systems:
1) the assembly instructions must be observed
2) for further application parameters, please refer to the selection tables
3) for special applications, we recommend contacting us and using our data entry form for energy supply systems