VoIP Entry Phone with Touch-Free Calling VIK-E-30TF-IP

Product Information

Specification

Viking E-30TF-IP – VoIP Entry Phone with Touch-Free Calling

About :

The E-30TF-IP Touch-Free VoIP Entry Phone features a motion sensor for touchless calling, activated by a simple wave. It supports SIP VoIP systems with PoE, allowing handsfree communication. The device can dial up to 5 programmable numbers and includes a 2 Amp relay for controlling doorstrikes or gates. It can be programmed via touch-tone phone, PC, or remotely with a static IP. The LED changes color to indicate call status: blue when idle, flashing green during dialing, and solid green when connected. An optional RC-4A Secure Relay Controller is available for added security.

Also Known As :

Emergency Phone, Emergency Call Box, Hotline Phone, Help Point Phone, Hotline Phone

Specification :

Core Features :

• Touch-free motion sensor with adjustable range from one to four inches
• Motion sensors ring LED lights blue during idle, flashes green during dialing and lights steady green when call is answered
• Automatic polling and programming software included
• 2 Amp relay contacts for door/gate or SL-2 Strobe Light control
• SIP compliant
• Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
• PoE powered (class 1, <4 Watts)
• Automatic Noise Canceling (ANC) for proper operation in noisy environments
• VoIP eliminates the need for “Push to Talk” mode
• Network downloadable firmware
• T-10 Torx security screws for added security
• Can be used with optional RC-4A Secure Relay Controller
• Marine grade 316 stainless steel prevents corrosion on stainless steel models
• Laser etched graphics on stainless steel models
• Programmable to dial up to 5 numbers on busy or ring no answer
• Cycles through backup phone numbers on busy or no-answer
• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
• Hangs up on busy signal, time-out or touch tone command
• Remotely programmable
• Extended temperature range of -40°F to 140°F
• Volume adjustments for microphone and speaker
• Flush mount using the included rough-in box or can be surface mounted using an optional VE-5×5 Surface Mount Box
• Diagnostics for testing microphone, speaker, and relay