Product Information

Specification

About:

The Okonite Stranded Bare Copper Shielded FMR Okolon TS-CPE UL TC/TC-ER Tray Cable is a high-performance cable designed for use in industrial and commercial applications. It offers superior electrical and mechanical properties, making it suitable for demanding environments. The cable features a robust construction with Okolon TS-CPE insulation and a shielded design to minimize electromagnetic interference.

Also Known As:

• Tray Cable
• TC Cable
• TC-ER Cable
• FMR Cable
• Shielded Tray Cable

Application:

• Okonite-FMR Okolon TS-CPE Type TC or TC-ER tray cable is permitted for use on power, lighting, control, and signal circuits; indoors or outdoors; in cable trays, raceways, direct burial in the ground, or where supported in outdoor locations by a messenger wire; for Class 1 circuits as permitted in Article 725 of the NEC; and in cable trays in Class I, Division 2 hazardous locations in industrial establishments where the conditions of maintenance and supervision assure that only qualified persons will service the installation.
• Cables Marked TC-ER may also be used between a cable tray and the utilization equipment or device, when installed in accordance with NEC 336.10(7).

Standards:

• National Electrical Code (NEC): Compliant with NEC requirements for XHHW-2 cables.
• UL Standard 44: Meets UL 44 standards for rubber-insulated wires and cables.
• RoHS Compliant: Complies with the Restriction of Hazardous Substances Directive for environmental safety.
• IEEE 1202/FT4: Flame test compliant.

Construction:

• Conductor: Uncoated soft copper per ASTM B-3. Sizes smaller than #8 are compress stranded per ASTM B-8. Sizes #8 and larger are compact stranded per ASTM B-496.
• Insulation: Okonite-FMR meets or exceeds requirements of UL 1581, ICEA S-73-532(NEMA WC57) and ICEA S-95-658 NEMA WC70 Type II insulation.
• Color Coding: Base colors and tracers as shown on reverse of Data Sheet, and for sizes #8 AWG and larger, black conductors with surface printing of numbers per ICEA S-73-532 NEMA/WC57 Method 4.
• Grounding Conductor: Where indicated, bare or green insulated stranded copper per ASTM B-8 for sizes #8 AWG and smaller, compact round for sizes larger than #8 AWG per ASTM B-496 and in accordance with NEC Table 250.122.
• Assembly: Conductors cabled in accordance with UL 1277 using fillers, as necessary, with a cable tape overall.
• Overall Jacket: Complies with UL 1277. The Okolon TS-CPE compound meets or exceeds the requirements of UL 1581. UL Listed as Type TC or TC-ER cable with a sunlight resistant jacket and for direct burial.

Features:

• For cable tray use.
• For direct burial.
• Sunlight resistant.
• Insulated conductors are UL rated XHH/XHHW-2, cUL rated RW75/RW90, VW-1, PR I, and -40C.
• Flame retardant - passes the vertical tray flame test requirements of IEEE 383-1974 and 1202/FT4, UL 1277 ICEA T-29-520(210,000 BTU/hr.).
• UL listed for cable tray use.
• 90°C continuous rating in wet or dry locations
• 130°C emergency overload rating
• 250°C short circuit rating.
• Okonite-FMR Okolon TS-CPE Type TC or TC-ER cable are quality control inspected to meet or exceed applicable industry standards.
• Resistant to moisture and most chemical atmospheres.
• Thermal stability at elevated temperatures.
• Flexible, easy to install and terminate.
• Mechanically rugged.
• High dielectric strength.
• Small diameter, lightweight.
• Minimum installation temperature of -31°F or -35°C.

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.