Product Information

Specification

Oil Burner & Boiler Install Kit 522KIT

Description:

This Kit provides the recommended test instruments required by Oil Burner & Boiler start up manuals for proper installation and maintenance. Most equipment warranties require initial install readings to be documented upon installation.

522KIT is packed in this UEi Tool Backpack. Built rugged, waterproof base, two compartments with inner pocket options and includes D-clip.

This equipment helps confirm:

• Manufacturer requirements to maintain warranty
• Combustion analysis for fuel efficiency
• Heat exchanger integrity
• Smoke level in the flue gases
• CFM via external static pressure test
• Gas flow pressure
• System is safe from gas leaks
• Proper high voltage to power supply and ground
• Low voltage meets wiring diagram requirement

Features:

• Manufacturer requirements to maintain warranty
• Combustion analysis for fuel efficiency
• Heat exchanger integrity
• Smoke level in the flue gases
• CFM via external static pressure test
• Gas flow pressure
• System is safe from gas leaks
• Proper high voltage to power supply and ground
• Low voltage meets wiring diagram requirement

Standards:

• Ingress Protection : IP42
• ETL listed : cETLus
• IEC : 61010 61010-1: 2012
• CE Conformity : Yes
• CAT Rating : CATIV 300V / CATIII 600V
• RoHS : Yes
• FCC/IC compliant : FCC
• REACH compliant : Yes
• AHRI 1260 standard : Yes
• Certification : The C161 is independently tested and certified to EN 50379, Parts 1-3 in accordance to 1st German Federal Emission Control Ordinance (BlmSchV)

Includes:

• Combustion Analyzer : C161
• Meter : DL579
• Manometer : EM201SPKIT
• Leak Detector : CD100A
• Thermometer : PDT655
• Batteries : AAA (2), 9V, CR2032, Rechargeable AA (3)
• Smoke Pump Test Kit : SPT1
• Tool backpack : AC550

Functions:

• TRMS : Yes
• AC volts : 750V AC
• DC volts : 1000V DC
• AC current (amps) : 600A AC
• AC micro current (amps) : 2000µA
• DC micro current (amps) : 2000µA
• DC micro volts : 600mV
• AC micro volts : 600mV
• Resistance (Ohms) : 60 MΩ
• Capacitance (Farads) : 6000µF
• Frequency (Hertz) : 99.99kHz
• Duty cycle (%) : 1.0 to 99.0%
• Temperature : -328˚ to 2462˚F
• Continuity : Yes
• Diode : Yes
• NCV detection : Yes
• CO : 2000ppm
• CO2 : 20%
• O2 : 21%
• Flue temperature : 32˚ to 1112˚F
• Inlet temperature : 32˚ to 1112˚F
• Heat exchanger test : Yes
• Pressure : ±60 InH2O
• Differential temperature : Yes
• Detects : Combustible Gas
• K-type temperature range : -40˚ to 950˚F (-40˚ to 510˚C)
• Detection sensitivity : < 50ppm methane
• LRA Inrush : Yes
• Low Z : Yes