Product Information

Specification

Igus SUB-D Pin A Connector Festo NEBM-M12G8-E-xxx-N-S1G15 Encoder Cable

Also Known as: 

Encoder Cable, Igus Connector Cable, IGUS Cable, Igus SUB-D Pin A Cable, Ready Cable, Base Cable

Construction:

Conductor: Very finely stranded special cores of particularly high-flex design made of bare copper wires.
Conductor insulation: Mechanically high-quality TPE mixture
Conductor construction: 2 cores each stranded in pairs with short pitch lengths, core pairs also stranded with short pitch lengths.
Conductor identification: Colour code according to DIN 47100
Overall shield: Extremely bending-resistant braiding made of tinned copper wires. Coverage approx. 70% linear, approx. 90% optical.
Unshielded: No
Outer jacket: Low-adhesion, halogen-free, highly abrasion-resistant mixture on the basis of PUR, adapted to suit the requirements in energy chains® (following DIN EN 50363-10-2).
Jacket color: Window grey (similar to RAL 7040)

Properties and Approvals:

UV resistance: Medium
Oil resistance: Oil-resistant according to DIN EN 50363-10-2
Offshore: MUD-resistant following NEK 606 - status 2009
Flame retardant: According to IEC 60332-1-2, CEI 20-35, VW-1, FT-1
Silicone-free: Free from silicon which can affect paint adhesion (according to PV 3.10.7 – status 1992).
Halogen-free: Following EN 60754
UL/CSA AWM: see data sheet for details
NFPA 79: Following NFPA 79-2012 chapter 12.9
DNV: Certified to DNV type examination – certificate no.: 13 656-14 HH
EAC: Certified to no. TC RU C-DE. ME77.B.01559
CTP: Certified to no. C-DE.PB49.B.00416
Lead free: Following 2011/65/EU (RoHS-II)
CEI: Following CEI 20-35
Clean room: According to ISO Class 1. Outer jacket material complies with CF77.UL.05.12.D, tested by IPA according to standard 14644-1
CE guideline: Following 2014/35/EU

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.