Garrie AI: Your Cable Guide
Hook And Loop Closure For Indoor Use General Purpose Fastener 31302
Where are we? 4 Continents 9 Countries
Got any Questions?
Speak with a real person who will go out of their way to help you!
Call Us: 1-516-482-6313Text Us: 1-516-703-3460
Quick Support
Product Information
Specification
Also Known As :A general-purpose fastener refers to a hardware device that mechanically joins or affixes two or more objects together.
About :
• A thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut.
• These can be considered fasteners as well. They are substances applied to surfaces, or the surfaces themselves, to bind them together and resist separation.
• A permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite the head is called the tail.
Standards:
• A small piece of wire bent so as to bind papers together by driving the ends through the papers and folding them over.
• Used to connect structural and non-structural elements to concrete. The connection can be made by the different types of anchors such as mechanical anchors or chemical anchors.
• A pin-shaped object of metal (or wood, sometimes) which is used as a fastener, as a peg to hang something, or sometimes as a decoration.
Construction :
• Typically made of metal, with a helical ridge, known as a male thread (external thread). Screws are used to fasten materials by digging in and wedging into a material when turned, while the thread cuts grooves in the fastened material which may help pull fastened materials together and prevent pull-out.
• A combination of a nut (a type of fastener with a threaded hole) and a bolt (a type of threaded fastener with an external male thread), often made of metal. Bolts are closely related to screws.
Specification :
| Adhesive Peel Strength (PIW) : |
8 |
| Adhesive Type : |
Acrylic |
| Application Instructions : |
Clean the surface, remove liner and press, please wait 24 hours |
| Available Locations : |
North America |
| Base Material : |
Polyamide |
| Bond Type : |
Semi-Permanent |
| Case Dimensions D X H X W (in) : |
19 X 11.75 X 11.625 |
| Case Weight (lbs) : |
19.22 |
| Color : |
White |
| Cycle Life : |
High |
| Each Dimensions D X H X W (in) : |
11 X 11 X 3 |
| Each Quantity : |
1 |
| Each Weight (lbs) : |
2.321 |
| Hook Shape/Number : |
Hook 88 |
| Loop Shape/Number : |
Loop 1000 |
| Minimum Order Quantity : |
6 |
| Non-recommended substrates : |
Anodized Aluminium, Polyethylene, Polypropylene, Fabrics |
| Number of eaches per case : |
6 |
| Peel Strength (PIW) : |
4.2 |
| Product Family : |
Professional Series |
| Product Type : |
Textile |
| Put-up (yards) : |
25 Yard Roll |
| Recommended substrates : |
Glass, Painted Wallboard, Plywood, Polyester, Stainless Steel, Vinyl, Formica (Polished side), Cardboard, Polyacrylic |
| Shear Strength (PSI) : |
12 |
| Shelf-life in days : |
730 |
| Style : |
Woven |
| Sub-Family : |
Woven hook & woven loop |
| Temperature Range : |
-30°F - 140°F |
| Tension Strength (PSI) : |
7.5 |
| Types of engagement : |
Woven hook & woven loop |
| Typical Applications : |
Control Systems, DAS, Data Comm, Electrical, HVAC, Pro AV, Security |
| Width (inches) : |
1' |
| UPC: |
075967313029 |
| UNSPSC: |
11162114 |
Features :
• Fasteners can be made from numerous materials including steel, stainless steel, brass, bronze, aluminum, titanium, and various plastics. The choice of material affects the fastener's strength, corrosion resistance, magnetic properties, and electrical conductivity.
Design:
• The design of a fastener, such as its head type (flat, round, hex, Phillips, Torx, etc.), thread design (coarse, fine, twin-thread, etc.), and point design (sharp, blunt, drill, self-drilling, etc.), impacts its usage and the tools required for installation.
Load Capacity:
• Different fasteners have different tensile and shear strength ratings, determining how much load they can handle before failing.
Drive Type:
• The type of drive or socket (slot, Phillips, hex, Torx, etc.) determines what type of tool is needed to install or remove the fastener.
Finish and Coating:
• Fasteners may have various finishes and coatings (zinc-plating, black oxide, chrome plating, hot-dip galvanizing, etc.) to enhance corrosion resistance, improve appearance, or reduce friction.
Reviews
Call Us: 1-516-482-6313 Text Us: 1-516-703-3460