HELUKABEL PAAR-TRONIC PVC DATA CABLE

HELUKABEL PAAR-TRONIC PVC DATA CABLE

Applications:

Suitable for flexible applications with free movement, without tensile stress and without forced motion control in dry, damp and wet rooms, however, not suitable for outdoor use. Used as a control and signal cable in electronic engineering, measurement and control technology and wherever wiring must be executed using the smallest possible outside diameter, with consideration of electronic possibilities, e.g. computer systems, signal technology, scales etc. 

Also Known As:

HELUKABEL PAAR-TRONIC PVC cable, PAAR-TRONIC data cable, HELUKABEL industrial data cable, PVC data control cable HELUKABEL, PAAR-TRONIC twisted pair cable, HELUKABEL signal transmission cable, HELUKABEL low voltage data cable, PAAR-TRONIC control & data cable, HELUKABEL PVC shielded data cable.

Technical Data:

PVC data cable in alignment with DIN VDE 0812

Temperature range
flexible -5°C to +80°C
fixed -30°C to +80°C

Peak operating voltage
350 V (not for high power current installation purposes)

Test voltage core/core
1200 V

Breakdown voltage
2400 V

Mutual capacitance core/core 
at 800 Hz 0.14 - 0.25 mm²: approx. 100 pF/m 0.34 - 0.75 mm²: approx. 150
pF/m

Capacitive coupling k1
at 800 Hz, max. 300 pF/100m

Characteristic impedance
78 Ohm, (approx. value)

Inductance
approx. 0.65 mH/km

Minimum bending radius
flexible 7.5x Outer-Ø
fixed 4x Outer-Ø

Cable Structure:

• Copper wire bare, 0.5 - 0.75 mm²: finely stranded acc. to DIN VDE 0295 Class 5 / IEC 60228 Class 5
• Wire structure:
0.14 mm²: approx. 18 x 0.1 mm
0.25 mm²: approx. 14 x 0.15 mm
0.34 mm²: 7 x 0.25 mm
• Core insulation: PVC acc. to DIN VDE 0207-363-3 / DIN EN 50363-3 (compound type TI2)
• Core identification acc. to DIN 47100 (paired stranding), colour coded
• x = without protective conductor
• Cores stranded in pairs with optimal lay lengths, Pairs stranded in layers with optimal lay lengths
• Foil wrapping
• Outer sheath: PVC acc. to DIN VDE 0207-363-4-1 / DIN EN 50363-4-1 (compound type TM2)
• Sheath colour: grey (RAL 7032)
• Length marking: in meters

Properties:

• largely resistant to: oil, for details, see "Technical Information"
• the materials used during manufacturing are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers

Tests:

• flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332- 1-2 / IEC 60332-1-2
• certifications and approvals: EAC

Notes:

• The conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only