EDGE MTP Extender Trunk 96F Bend-Improved Single-Mode (OS2) 100 Ft G899096GPNCDX100F

Product Information

Specification

About:

The EDGE MTP Extender Trunks provide additional distance for the backbone of the EDGE Solution. With a non-pinned MTP on one end of the cable, a pinned MTP on the other and a TIA-568 Type-A polarity, these trunks are designed to interface with a EDGE or Plug & Play module and an MTP trunk. All trunks are shipped with strain-relief clips that allow for the tool-less installation in both EDGE and Plug & Play housings. Most often these extender trunks will be used in a Zone Distribution Area (ZDA).

Specifications:

Flame Rating: Plenum (OFNP)
Fiber Category: Bend-improved Single-Mode (OS2)
Cable Assembly Type: EDGE Trunk
Environment: Indoor
Application: Data Center LAN/SAN 
Connector Assembly Type: MTP to MTP
Fiber Count: 96
Fiber Type: Single-mode
Fiber Code: G
Fiber Type: Single-Mode Ultra-Bendable Fiber
Fiber Core Diameter: 8.2 µm
Fiber Category: OS2 
Insertion Loss, Max.: 0.35 dB
Boot Color: Black
Connector A Type: MTP (pinned)
Connector  B Type : MTP (non-pinned)
Pulling grip: Yes
Length: 100 ft
Cable Weight: 74.59 lb/1000 ft
Packaging Method: Plastic reel
Reel Diameter: 23.5 in
Leg Diameter: 2 mm (0.08 in)
Reel Width: 5 in
Leg Color: Yellow
Leg Count: 8
Leg Length (Connector A): 1524 mm   -0 / +76mm (60 in   -0 / +2.99in)
Leg Length (Connector B): 838 mm   -0 / +76mm (32.99 in   -0 / +2.99in)
Part Number: G899096GPNCDX100F

Features:

• Snap-in strain-relief clips
Provide easier cable management
• Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
• Low-loss connectivity
Enables system design flexibility
• Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
• Corning Clean Advantage technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection