Product Information

Specification

ECS RW004ST 4/0 AWG 1C 19 Strand Bare Copper Unshielded Flame Retardant XLPE 600V 90°C RW90 Building Wire

Allowable Ampacity for ECS RW004ST 4/0 AWG 1C 19 Strand Bare Copper Unshielded Flame Retardant XLPE 600V 90°C RW90 Building Wire: 100 Amps

Applications:

For open wiring and raceways (except cabletroughs and ventilated flexible cableway) in dry or wet locations.
For exposed wiring where exposed to weather with sunlight resistant insulation. Standard Black #6 and larger is sunlight resistant and marked "Outdoor"; coloured insulation is NOT.
Minimum recommended installation temperature minus 40°C (with suitable handling procedures).
Maximum conductor temperature 90°C.
Approved for use with ceiling fixtures.

Also Known as:

RW90 Cable, Electrical Cable, Ceiling Fixtures Cable, ECS Cable, Flexibel Cable, Building Wire

Description:

Single copper conductor with low temperature moisture resisting cross-linked polyethylene insulation.
Non-jacketed RW-90 (XLPE) cables are not suitable for installation in vaults and switch rooms under the conditions of C.E. Code Part 1 Rule 12-2204. Suitable flame retardant jacketed cables are available on request.

Specification:

AWG Size: 4/0
Number of Conductor: 1
Stranding: 19 Strand
Conductor: Bare Copper
Insulation: XLPE
Shielding Type: Unshielded
Insulation Inches: 0.055 inches
Ampacity (amps) Free Air: 385
Ampacity (amps) Conduct: 235
Nominal O.D (inches): 0.63
Voltage: 600V
Weight: 2,267 lbs/km
Part Number: RW004ST

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color