Product Information

Specification

ECS FAAP16-03CB0 16 AWG 3C Solid Bare Copper Unshielded Red AIA FT4 PVC 300V CSA Alarm Cable

Allowable Ampacity for ECS FAAP16-03CB0 16 AWG 3C Solid Bare Copper Unshielded Red AIA FT4 PVC 300V CSA Alarm Cable: 100 Amps

Applications:

ELECTRALERT® is designed for the interconnection of security system elements: including fire protective signaling devices such as smoke and fire detectors, fire alarms, and two-way emergency communication systems. For use in normally dry locations for the wiring of control circuits of heating equipment and signaling
circuits, etc.

• FAS105: Fire Alarm & Signal Cable for interconnection of electrical devices within a security and fire protective signaling system. The cables are intended for installation according to Section 32 of the Canadian Electrical Code.

• FT1: For installation in buildings of combustible construction (excluding plenum areas) per the Canadian Electrical Code, Rule 2-126 and the National Building Code Article 3.1.4.3.

• FT4: For installation in buildings of non-combustible construction and plenum areas in any building per the Canadian Electrical Code, Rule 2-126 and the National Building Code Articles 3.1.5.18 and 3.6.4.3.

Also Known as:

Component Cable, ECS Cable, Alarm Cable, ECS Fire Cable, Electrical Cable, AIA FT4 Alarm Cable, Communication Cable, Signal Cable

Description:

ECI ELECTRALERT FIRE ALARM & SIGNAL CABLE FAS105 300 VOLTS SUN RES CSA LL61365.

Specification:

AWG Size: 16
Number of Conductor: 3
Stranding: Solid
Conductor: Bare Copper
Insulation: PVC
Jacket: PVC
Shielding Type: Unshielded
Final Diameter: 0.406 inches
Voltage: 300 V
Weight: 69 lbs/1000 ft
Part Number: FAAP16-03CB0

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color