Product Information

Specification

Insulation

Okolene® is Okonite's trade name for its low loss polyethylene insulation. The two solid bare copper conductors are insulated with Okolene and twisted together to form a balanced pair. A belt of Okolene is then extruded over the twisted pair and into the interstices.

Shield and Jacket

A polyester tape, 5 mil flat copper tape and a 5/64€� black Okolene jacket is applied over the belted core to complete the construction a twin coaxial cable configuration.

Applications

This C.T.C. cable is used on circuits where minimum attenuation and low capacity is essential. It is designed not only for code pulses but also provides for superimposed high frequency circuits. The cable is mechanically rugged and can be installed aerially or underground and is suitable for direct burial by means of a cable plow in all wet and dry locations.

Specifications

Conductors: Solid uncoated copper per ASTM B-3.
Insulation: The dielectric meets or exceeds electrical and physical requirements of ASTM D-1248-84, Type I, Class A, Category 5, Grade #5.
Jacket: Meets or exceeds requirements of ASTM D-1248-84, Class C, Type I, Grade J3 and AREMA Signal Manual Part 10.3.21.

Product Features

• Mechanically rugged.
• Resistant to aging.
• Easy to install and maintain.
• Resistant to environmental hazards.
• Superior moisture resistance.
• Outstanding termite protection.
• Excellent electrical properties...high dielectric strength, low capacity (SIC) and power factor and high insulation resistance.
• Pull Cord feature affords easy and quick accessibility to conductors for splicing and terminations. PCF is safety oriented.

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color