Cat IV Insulation Testers For Electrical And Industrial Maintenance MIT400-2

Product Information

Specification

About:

• The MIT400-2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance, etc.

• Insulation testing has been enhanced with feedback-controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.

• A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application-specific test voltages are required that do not appear in the standard ranges.

• Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.

• Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6-cell battery compartment with separate fuse access. All instruments are over-molded for increased protection and achieve an IP54 weatherproof rating.

Also Known as:

Electrical measurements, cable testing, motor testing, automotive, panel building & MIT400-2 series.

Specifications:

• Charger (Optional): 12-15 V dc (accessory interface)
• Dimensions: Instrument 228 mm x 108 mm x 63 mm (9.00 in x 4.25 in x 2.32 in)
• Fuse: Use only 1 x 500 mA (FF) 1000 V 32 x 6 mm ceramic fuse of high-breaking capacity HBC 30 kA minimum. Glass fuses MUST NOT be fitted.
• Safety protection: The instruments meet EN 61010-1 (1995) to 600 V phase to earth, Category IV. Refer to safety warnings supplied.
• IP rating: IP 54

Features:

• Insulation testing up to 1000 V and 200 GΩ range
• Stabilised insulation test voltage (New)
• Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)
600 V Trms AC and DC voltage measurement
• Live circuit detection and protection
• User variable insulation test voltage from 100V to 1000V (New) depending on the model
• Test result storage and Bluetooth® downloading depending on the model
• Rechargeable options for mains and car charging (New)depending on model
• CAT IV 600 V & IP54