Product Information

Specification

Also Known As :
When force is applied to the rod, the spring compresses or extends, and when the force is removed, the spring returns the rod to its original position. Commonly found in mechanisms like switches, buttons, or actuators.

About :
A coil spring rod generally refers to a rod that is either actuated by a coil spring or is integrated with a coil spring in its design. Coil springs are helical or spiral-shaped springs made from a wire and are used to store energy and release it to absorb shock or maintain a force between two surfaces.

Common Applications: :
• The primary purpose of adjustable roller levers is to detect or sense the presence or position of objects. When an object interacts with the roller, the lever moves, thereby actuating an attached switch or sensor.
• The lever's length can be adjusted to accommodate different applications or requirements. This feature ensures the switch or sensor is actuated at the exact desired point or position.
• Equipped with a roller at its tip to reduce wear and friction, especially when in contact with moving parts. Commonly found in machinery, conveyor systems, door mechanisms, and other equipment where position detection or object presence is crucial.
• These switches are used to detect the presence or position of an object. The adjustable rod can be set to actuate the switch when an object reaches a specific point.

Standards:
• This is a flexible or rigid elongated component that transfers motion from one end to the other.
• Attached to the base of the rod, this mechanism amplifies the motion of the rod and converts it into a usable force or motion to actuate a switch or another device.• Captive cover screws.
• Allows users to change the length of the rod or the angle at which it actuates, thereby altering the actuation point.
• These rods are often adjustable and use coil springs to maintain tension.

Construction :
• The spring's coil design allows it to store energy when compressed and release it when extended. Depending on the application, the rod may be designed to move linearly with the spring, or the spring might be an auxiliary component to maintain tension or provide resistance.
• Both the rod and spring are typically made of durable metals, often steel or stainless steel, to withstand the stresses of repeated compression and extension.
• Depending on the application, the rod and spring might be integrated into a single assembly, or the spring might be a removable component. Many rods and springs have a protective coating or finish to prevent rust, corrosion, and wear.
• As an external force or motion is applied to the rod, it moves the lever mechanism.

Specification :

Features :
• UL Listed. File E 100480
• Wide choice of heads and actuators.
• Captive cover screws
• Dustproof, Oil Tight, Water Resistant
• Silver/Gold alloy contacts, double contact design.
• Stainless steel essentials.
• Standard size & dimensions, ½" conduit entry
• Temp. range +5° F to +175° F (-15° C to +80° C)
• Hi-Pot Voltage -2200VA/minute
• Insulation Resistance -100 MΩ on 500VDC.
• Contact Arrangement -2 Circuits: 1 NO, 1 NC
• Max. Operating Freq.120 mech. operations/minute. 30 elect. Operations/minute.
• Life Test- Mech: Ten Million Operations. Elect: 750,000 Operations @10 Amp/240V AC