715 QR SCT-QR CommScope Tool with Ratchet T-handle Stripping and Coring Tools RSCT-715QR

Product Information

Specification

Description

SCT-QR hardline stripping and coring tools strip back and bevel the outer conductor, core the dielectric, and strip back the outer jacket on CommScope Quantum Reach (QR) cables.

Features

Three Functions in One Operation: SCT-QR tools speed connectorization because they strip back and bevel the outer conductor and core the dielectric in one smooth operation.

Non-clogging Stops: There is a non-clogging internal stop on every SCT-QR tool that is factory-set to the required dimension for the cable.

Patented Stripping/Coring Blades: The bevel on the coring edge of the blade self-aligns on the center conductor, which enables an SCT-QR tool to core cable even when it is out-of-round. Made of tool steel that is heat treated to full hardness, the blade bevels the outer conductor, thereby eliminating O-ring damage and minimizing water migration.

Manual or Drill Operation: SCT tools can be ordered with a standard ergonomic handle or a Cable Prep brand RTH ratchet T-handle. Either handle can be removed for operation with a 3/8-inch variable speed drill.

Attached Jacket Stripping Tool: Because the jacket on QR cable must be stripped after the coring operation, each SCT-QR stripping/coring tool (labeled SCT-QR-A) comes with a special jacket stripping tool (labeled SCT-QR-B). The two pieces are threaded, so they can be assembled and stored as one unit, which protects the insides of the parts from damage. The jacket stripper is designed with a patented mandrel pin that supports the soft aluminum outer conductor and keeps it from being damaged during the jacket stripping operation.

Applications

SCT-QR Hardline stripping and coring tools strip back and bevel the outer conductor, core the dielectric, and strip back the outer jacket on CommScope Quantum Reach (QR) cables. SCT-QR Hardline stripping & coring tools work on 0.7MM through 1.125mm CommScope Quantum Reach (QR) cables.

Note that, because the jacket must be stripped after coring, SCT tools for QR applications include a special, integrated jacket stripper made especially for this purpose.

Specification

Type: SCT/QR Coring & Stripping Tools
CommScope Quantum Reach cable Size: 715QR
Part Number: RSCT-715QR

Ordering Information

SCT-QR tools can be ordered with either a standard handle or a ratchet T-handle. The ratchet T-handle can be removed for use on any Cable Prep brand SCT- and AIO-series tool.

Replacement blade kits include a coring-tool blade, a jacket-stripping blade, screws, a spring washer, and a hex key.

SCT-QR tools include the appropriate jacket stripper.No separate jacket stripper needs to be ordered.