Product Information

Specification

6 AWG Type MV-90 2.4KV EPR/PVC Unshielded Power Cable

Application:

• UL listed and OSHA acceptable. Where NEC requirements apply, cables are suitable for use in wet or dry locations at maximum operating temperature of 90°C for normal operation; 130°C for emergency overload conditions; and 250°C for short circuit conditions. Cables may be installed in conduit, duct or aerially when properly supported by a messenger.

Scope:

• This specification covers non-shielded, single conductor cables having stranded, coated copper conductors; taped semi-conducting strand shield; ethylene propylene rubber (EPR) insulation; and polyvinyl chloride (PVC) jacket. Cables are rated 2,400 volts, 90°C in wet or dry locations, and meet the requirements of ICEA S-96-659 (NEMA WC 71), Article 328 and 310 of the National Electrical Code, and UL-1072.

Also Known As:

6 AWG Power Cable, EPR/PVC Power Cable, 6 AWG Type MV-90 Power Cable, MV-90 Single Conductor Cable, 6 AWG MV-90 2.4KV Power Cable

Construction:

Conductors: 

Compressed class B stranded annealed Tinned copper

Conductor Shield:

Nylon semi-conducting tape.

Insulation:

90°C rated Ethylene Propylene Rubber (EPR) per ICEA S-96-659 part 3.

Jacket:

Extruded PVC jacket with excellent mechanical properties per ICEA S-96-659, part 5.

Specifications:

• Size: 6 AWG
• No. of Strands: 7 
• Nom. Cond. Diameter (In): 0.181  
• Min. Avg. Insulation Wall (In): 0.125
• Nom. Insulation Diameter (In): 0.450 
• Min. Avg. Jacket Thick. (In): 0.080 
• Approx. O.D. (In): 0.605 
• Allowable Ampacities+ (Amps): 75
• Approx. Net Weight lbs./Mft.: 231 

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color