Product Information

Specification

Allowable Ampacity for 6 AWG 3C Tinned Copper Shielded EPR CPE/CR 2KV Fleximining Medium Type SHD GC Cable: 100 Amps

About:

The "6 AWG 3C Tinned Copper Shielded EPR CPE/CR 2KV Fleximining Medium Type SHD GC Cable" you are asking about is a specific type of industrial electrical cable.

Also Known As:

This cable is generally referred to by its specifications, which include 6 AWG (American Wire Gauge) size, 3C (3-core), tinned copper shielding, EPR (Ethylene Propylene Rubber) insulation, CPE (Chlorinated Polyethylene) or CR (Chlorosulfonated Polyethylene) jacket, 2KV (2 kilovolts) rating, and its designation as a Fleximining Medium Type SHD GC (Super Heavy Duty Ground Check) cable.

Application:

• These cables are designed for use on AC off track equipment, long wall miners loaders, drills, shovels, conveyors, pumps and mobile equipment requiring grounding conductors and a ground check conductor and metallic shielding overall.
• Suitable for other industrial and mining applications such as cable reelers, festoons, gantry cranes, stackler/reclaimers.

Standards:

This cable likely meets specific industry standards, such as those set by IEEE (Institute of Electrical and Electronics Engineers) for electrical properties, or by UL (Underwriters Laboratories) for safety. The exact standards would depend on the manufacturer and the intended use of the cable.

Construction:

• Power Conductors: Flexible tinned copper conductor, acc. to ASTM B-172/174
• Inner Semi-Conductive layer: Polyester tape (2 kV) or semi-conducting compound (from 5 kV up to 25 kV)
• Insulation: Rubber EPR compound
• Power Screen: mixed tinned copper wires + textile fiber or polyamide braid on each power core
• Ground Conductors: Two flexible tinned copper conductors acc. to ASTM B-172/174, uninsulated
• Monitoring Insulation: PP compound
• Cores color: Power: Textile fiber or polyamide braid on each power core: black, white, red acc. to ICEA S-75-381, black, black, red (2 kV), black, blue, red (from 5 kV up to 25 kV) acc. to CSA C22.2 No. 96-17, Monitoring: yellow
• Stranding: 3 power conductors laid up with 2 ground-conductors and a monitoring conductor in interstices
• Inner Sheath: Black (similar to RAL 9005), special rubber CPE or rubber compound
• Supporting Screen: Anti-twisting protection of polyester or polyamide braid
• Outer Sheath: Black (similar to RAL 9005), special rubber CPE or CR compound

Features:

• acc. to ICEA S-75-381/NEMA WC-58 or CSA C.22.2 No. 96-17
• CSA C.22.2 No. 96-17 version identified with ”5” on the 5th number of the Part. n
• MSHA approval
• *Current carrying capacity acc. to ICEA S-75-381 Table I-1, 40°C ambient temp. / 90°C cond. temp.
• Excellent flexibility
• Oil and heat resistant
• Ozone resistant
• Sunlight resistant
• Weather resistant
• Impact resistance
• Abrasion resistance
• On request PUR outer sheath
• For Minimum Bending Radius 
• RoHS approval

Specifications:

• Power AWG no: 3x6
• Ground AWG no: 2x10
• Monitoring AWG no: 1x10
• Outer-Ø ca.mm ± 10%: 31,7
• Maximum tensile load N: 600
• Current carrying capacity A: 93
• Nominal voltage: 2 kV up to 25 kV
• Temperature range UL: Fixed laying: -30°C up to +90°C, Flexible installation: -50°C up to +90°C
• Max. temperature in short circuit: + 250 o C
• Min. bending radius: 15 x D
• Cable Weight approx Lbs/Mft: 1042
• Part Number: 02110170037A06

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color