Product Information

Specification

10 AWG 7C Unshielded Tray Cable XLPE Insulation PVC Jacket 600V E2

Applications:

Primarily used for power, control, signal, communication and lighting circuits in commercial and industrial environments. Suitable for installation in cable trays, supported by messenger in open air, raceways, channels, conduits and ducts. Approved for direct burial applications and outdoors in cable tray where sunlight resistant rating is required. Also may be installed in wet or dry locations or in areas exposed to chemicals and oils.

Also Known As:

10 AWG 7C Cable Tray, 10 AWG 7C Cable Tray Types, 10 AWG 7C Electrical Cable Tray, 10 AWG 7C Pvc Cable Tray, 10 AWG 7C wire cable tray, 10 AWG 7C cable tray wire, 10 AWG 7C  Tray Instrument Cable, 10 AWG 7C Tray Instrumentation Cable, 10 AWG 7C TC-ER Cable, 10 AWG 7C direct burial tray cable, 10 AWG 7C EPR Cable, 10 AWG 7C CPE Cable, 10 AWG 7C Exposed Run Tray Cable, 10 AWG 7C XHHW tray cable,10 AWG 7C  XHHW tray wire,10 AWG 7C tinned copper tray cable, 10 AWG 7C Chlorinated Polyethylene cable, 10 AWG 7C Ethylene Propylene Rubber cable, 10 AWG 7C flame-retardant tray cable, 10 AWG 7C tray power cable, 10 AWG 7C tray control cable, 10 AWG 7C FREP cable.

Standards:

• UL Listed as TC-ER (Exposed Run) per UL Standard 1277 and used in accordance with NEC for 3 or more conductors.
• Approved for Class 1 or 2, Division 2 industrial hazardous locations per NEC
• Individual conductors pass UL VW-1 flame test and rated XHHW-2/VW1, UL 1581/UL 2556 VW-1
• Rated at 90°C wet or dry
• Oil Res I & II
• “Heavy Duty” rating per ICEA Standards
• Meets cold bend test at -25°C
• NEMA WC70/ICEA S-95-658, NEMA WC57/ICEA S-73-532
• IEEE 1202 and CSA FT4 70,000 BTU Flame Test
• IEEE 383 70,000 BTU Vertical Flame Test
• ICEA T-29-520 210,000 BTU

Conductor:

• Fully annealed bare copper per ASTM B-3, Class B stranding per ASTM B-8

Insulation:

• Flame retardant Cross-linked Polyethylene (FR-XLPE) that is heat and moisture resistant. Also has a VW-1 rating and is XHHW-2 per UL 44

Jacket:

• Flame and sunlight resistant black PVC rated 90°C wet or dry per UL 1277

Specification:

• Gauge: 10 AWG
• No. Conductors: 7
• No. of Strands: 7
• Insulation Thickness: 0.030 Inches
• Jacket Thickness: 0.060 Inches
• Overall Diameter : 0.670 Inches
• New Weight lb/1000FT: 328 Lbs

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color