2 AWG MV Non-Shielded Jumper and Switchgear Cable

2 AWG MV Non-Shielded Jumper and Switchgear Cable

Applications:

Medium voltage non-shielded cable is intended for use in substations installed on insulators and inside switchgear isolated from ground and where a non-shielded cable is desired. These cables are capable of operating continuously at a conductor temperature not in excess of 90°C. See Table 2 for installation guidelines. Single Conductor Tinned Copper EPDM Insulation with a CPE Jacket Non-Shielded Jumper Cable 

Also Known As:

2 AWG Medium Voltage Non-Shielded Power Cable MV Non-Shielded Jumper Cable Medium Voltage Switchgear Cable 2 AWG MV Switchgear & Jumper Cable Non-Shielded Medium Voltage Electrical Cable Medium Voltage Flexible Jumper Cable MV Equipment Interconnection Cable 2 AWG Medium Voltage Connection Cable Industrial Medium Voltage Jumper Wire Medium Voltage Power Interconnect Cable Non-Shielded MV Distribution Cable Medium Voltage Control & Switchgear Cable MV Panel Connection Cable

Standards:

• ASTM B3 Soft or Annealed Copper Wire
• ASTM B8 Concentric-Lay-Stranded Copper Conductors
• ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire

Construction:

1. Conductor: Tinned copper class B or C
2. Tape: Binder tape for ease of insulation removal
3. Insulation: Heat, moisture, and ozone resistant Ethylene Propylene Diene Monomer (EPDM)
4. Jacket: Thermoplastic Chlorinated Polyethylene CPE jacket 

Specifications:

• Size:  2 AWG
• Cond. Number: 1
• Number of Strands: 19
• Diameter Over Conductor  inch : 0.282
•  Insul Thickness (mil): 175
• Jacket Thickness:  80
• Approx. OD (inch) :   0.827
• Approx. Weight lb/1000ft : 469
• Jacket Color: BK
• DC Resistance @ 25°C:  0.162
• AC Resistance @ 90°C :   0.195
• Inductive Reactance@ Ω/1000ft : 0.045
• Max Pull Tension lb:  530
• Min Bending Radius lb:  3.3
• Allowable Ampacity At 75°C Amp :  115
• Allowable Ampacity At 90°C Amp : 130