Product Information

Specification

Allowable Ampacity for 18 AWG 1T Stranded Bare Copper Al Tape PVC Gaalflex Instrumentation ITC-PLTC 300 TOS Tray Cable: 100 Amps

About:

This is an instrumentation cable, typically used for transmitting signals or data. The "18 AWG" indicates the American Wire Gauge size, suggesting a specific thickness of the conductors. "1T" likely refers to the configuration or number of twisted pairs in the cable.

Also Known As:

Such cables might not have widely recognized alternative names, but could generally be referred to as instrumentation cables, control cables, or electronic cables.

Application:

Ideal for industrial settings, this cable is likely used for connecting electronic equipment, instrumentation devices, control systems, and data communication in environments where low electrical noise is required. Its design might make it suitable for both indoor and outdoor installations, including direct burial and use in conduit.

Standards:

Likely complies with certain industry standards for safety and performance, such as UL (Underwriters Laboratories), NEC (National Electrical Code), or IEEE (Institute of Electrical and Electronics Engineers) standards. It may also meet specific requirements for flame resistance, low smoke emissions, or environmental tolerance.

Construction:

• Conductor: Stranded red copper, acc.to ASTM B-3, Class B and ASTM B-8
• Insulation: Special PVC compound acc. to UL 66 and UL 2250, flame-retardant 105°C
• Colour cores: acc. to ICEA table E1: triads: black, white and red numbered
• Stranding: In triads
• Screen: Aluminium tape + PETP foil, + tinned copper drain wire
• Ripcord: Nylon ripcord under outer sheath
• Outer Sheath: Black (RAL 9005), special PVC compound, flame retardant and UV resistance

Features:

• Cable for tray use
• Outdoor use
• Sunlight and moisture resistance
• LEAD FREE
• Suitable for installations acc. to NEC 2008 and NEC 2011 Article 725 for Type PLTC cables and NEC 2008 and NEC 2011 Article 727 for Type ITC cables
• Suitable substitute for General purpose Class 2 (CL2X) and Class 3 (CL3) wiring, as well as Dwelling unit Class 2 (CL2X) and Class 3 (CL3X) wiring as per NEC 2008 and NEC 2011 Article 725
• Or request DIRECT BURIAL
• On request tinned copper conductors with “0” on fifth digit of the part number
• On request welded and corrugated aluminium armor and PVC outer sheath
• On request interlocked aluminium armour with or without PVC
• Outer sheath
• RoHS approval

Specifications:

• No. of pair(s) x cross section n x AWG: 1 x 3 x 18
• Outer-Ø ca.mm ± 10%: 6,15
• Nominal voltage UL: 300 V
• Temperature range UL: up to +105°C
• Test voltage: 1,5 k
• Cable Weight approx Lbs/Mft: 42
• Part Number: 32161C7K012A18

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color