18 AWG 1 Pair Type PLTC/ITC Copper PVC/PVC POS Instrumentation Cable 300V

18 AWG 1 Pair Type PLTC/ITC Copper PVC/PVC POS Instrumentation Cable 300V

Applications:

Instrumentation Cables Type PLTC per UL 13 and Type ITC per UL 2250 are suitable for installations as outlined in NEC Article 336 for process control and instrumentation, control circuits for operation and interconnection of protective and signaling devices and for general use in manufacturing, industrial and commercial distribution systems. Cables are constructed with 7-strand copper conductors insulated with PVC. The paired conductors are colored black, white, and alphanumeric printed. The overall assembly is covered with an aluminum polyester foil with 100% coverage and a tinned drain wire. The cable is suited for use in cable trays, raceways, conduit, aerial (when supported with a messenger). The cable is rated for -30°C to 105°C and rated for class I Div II hazardous locations, and sun resistant. The jacket is black PVC with a nylon ripcord for easy removal Type PLTC/ITC Instrumentation Cable 300 Volt Copper Conductors PVC Insulated Singles Overall Shield POS. PVC Jacket Heat, Moisture, and Sunlight Resistant RoHS rated for -30°C to 105°C

Also Known As:

18 AWG PLTC/ITC Instrumentation Cable PLTC/ITC Pair Instrumentation Cable Copper Pair Process Control Cable PVC 18 AWG Insulated PVC Jacket Instrumentation Cable 300V PLTC Instrumentation Cable 300V ITC Instrumentation Cable Paired Instrumentation & Control Cable Power-Limited 18 AWG Tray Cable (PLTC) Instrumentation Tray Cable (ITC) Process Automation Signal Cable Industrial Instrumentation Pair Cable

Standards:

• UL 13 Power-Limited Circuit Cables
• UL 2250 Instrumentation Tray Cable
• IEEE 383 Flame Test (70,000 btu)
• IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
• EPA 40 CFR, Part 26, Subpart C heavy metals per Table 1, TCLP method
• RoHS-2 (European Directive 2011/65/EU)
• NEC Article 336 Power and Control Tray Cable

Construction:

1. Conductors:   Class B stranded bare copper per ASTM B-3 and B-8
2. Insulation:  Twisted pair with Premium Grade Polyvinyl Chloride (PVC) .Color code: Black/White alpha-numeric printm alternate and inverted. 1-ONE, 2-TWO 
3. Overall Drain Wire: Tinned Copper
5. Overall Shielded: 100% coverage aluminum/polyester foil shield with a drain wire as shown in step 3
6. Rip Cord: Rip cord under jacket for ease of removal 
7. Jacket: Black sunlight, and moisture resistant Polyvinyl Chloride (PVC) 

Specifications:

• Size:  18 AWG
• Number of Pairs: 1
• Diameter Over Conductor  inch :  0.045
• Insul Thickness (mil): 15
• Jacket Thickness (mil):   35
• Approx. OD (inch) : 0.234
• Approx. Weight lb/1000ft :  32
• Min Bending Radius inch: 1.4
• DC Resistance @ 25°C: 6.669