129PO11 3/4" X 3/4" Push On Hose Barb X 45 Degree SAE Flare Swivel Brass Fittings 07211-1212

Product Information

Specification

129PO11 3/4" X 3/4" Push On Hose Barb X 45 Degree SAE Flare Swivel Brass Fittings 07211-1212

Also Known

129PO11 3/4 X 3/4 BARB

Typical Application:

Low-Pressure Air, Fuel, Lube, and Oil Lines

• Pressure determined by tube material and hardness. Midland Parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps are needed!!

• Assembly Instructions

1- Lubricate insert.

2- Hold the hose at an angle to insert over the first barb.

3- Continue to push straight on until the hose is seated under the protective plastic cap. Keep hands back from the hose end area so that hose can expand.

• Disassembling Instructions

1- Split hose. Do not cut completely through hose. Sealing edge of barb could be damaged. 2- Bend hose and remove with a quick pull.

  View Catalog Page