Product Information

Specification

King HME1012 11/15-FS-GW Model HM and HME Hydronic Wall Heater

Description:

King’s HM / HME Series medium hydronic heater uses the energy from a building’s existing hot water source to offer efficient, whisper quiet operation and the ability to reduce utility bills with individual room control. By installing hydronic heaters in every room, you can easily heat only the areas in use and conserve energy. Designed to fit neatly between standard wall studs, this in-wall heater provides out of the way positioning ideal for use in bedrooms, bathrooms, and laundry rooms. For use in both residential and commercial applications. Provides 3,300 to 18,700 Btu heat output.

Motor : 2 speed shaded pole impedance protected. Permanently lubricated. Bronze bearings.

Blower : Tangential blower to provide 150-375 CFM of air. Quiet operation of less than 53 dB A weighted scale at high speed. Easily removed for service. Bronze, not plastic, bearings.

Coils : 1/2″ OD Copper tubes with Aluminum fins of no more than 4 fins per inch for free flow of air and maximum circulation of air and water. Tested at 300 PSI for leaks. Bleed valve to purge air. Copper tube used in coils is Alloy 122 made to ASTM B-75 specifications.

Features:

• In-wall, Fan-Driven, Zone-Controlled Heat
• Heat Only The Rooms Which Need It, Borrowing Energy From What’s Already There: The Hot Water Heater
• Compatible With Typical Hot Potable Water Sources
• Tangential Blowers For Whisper Quiet Operation
• Fast Coil Heating For Heat Transfer
• 1/2” Trade Size Copper Tubes
• Flow-Through Design
• 4 or 8 Aluminum fins per inch
• Permanently Lubricated Motor
• Hi / Off / Lo Fan Switch
• For Use With HW Series Thermostats
• ETL Certified for USA and Canada
• Proudly Made in the USA with U.S. & Global Materials

Also known as:

King Electric Heater, Hydronic Heater, King Hydronic Heater, Medium in-wall Hydronic Heater, MODEL HM AND HME.