Product Information

Specification

1000' 23 AWG 4P Cat6A Solid Bare Copper 10G CMR Riser Unshielded Twisted Pair Cable 6ACMR234R

Allowable Ampacity for 23 AWG 4P Cat6A Solid Bare Copper 10G CMR Riser Unshielded Twisted Pair Cable 6ACMR234Rx : 100 Amps

Description :

23 AWG 4 Pair U/UTP 10G Category 6A cable tested to ANSI/TIA 568-C.2 for 10Gbps @500Mhz premium grade, high performance for top level network cabling for maximum headroom and bandwidth. Available in Wood Reel for easier installation.

Also Know As :

Category 6 Cable, 6ACMR234Rx, Twisted Pair Cable, Bare Copper Cable, Direct Burial Cable, CMR Riser Cable

Features And Benefits:

• • Category 6A performs at improved specifications, particularly in the area of alien crosstalk. Category 6A make use of their higher standards by allowing full 10GBASE-T transmission speeds of up to 10Gbps, at 500MHz of signal bandwidth, over 100 meters (330 ft)
• • Improved cable temperature rating (75° C Riser) for greater protection against increased operating temperatures and for high-wattage applications
• • The internal separator optimizes each pair for superior electrical perfomance and maintains flexibility. This unique spline stabilizes each pair to create a smaller, round cable profile

Applications:

• • IEEE 802.3 10G Base-T, 1000Base-T, 100Base-TX, 10Base-T, PoE, PoE+
• • ANSI/TIA 854: 1000Base-TX
• • CDDI, Token Ring, ATM
• • Digital Video
• • Broadband and Baseband Analog Video

Standard Compliances:

• • ANSI/TIA 568-C.2
• • ANSI/TIA 862 (Building Automation)
• • ISO/IEC 11801 Ed. 2.0 (Class EI)
• • ICEA 8-102-700 (Category 6 or 5E)
• • REACH Compliant
• • CPR Compliant (Fully Comply to 305/2011 & EN 50575:2014-09)
• • RoHS Compliant Directive 2002/95/EG

Electrical Characteristics:

• • 1.0 - 250.0MHz characteristic impedance (ohms): 100Ω±15Ω
• • 1.0 - 250.0MHz Delay Skew (ns/100m): ≤45
• • Pair-to-Ground Capacitance Unbalance (Pf/100m): ≤330
• • Max. Conductor DC Resistance 20 (ohms/km): 9.38Ω/100m
• • Resistance Unbalance (%): ≤5
• • Max Mutual Capacitance: 5.6nF/100m
• • Max DC Loop Resistance: 19.2Ω/100m
• • Min DC Insulation Resistance: 150MΩ/Km
• • Max Propagation Delay Skew: 2ns/ft,40ns/100m
• • Before Aging Tensile Strength (Mpa): ≥10.0
• • Before Aging Elongation (%): ≥100
• • After Aging Tensile Strength (Mpa): ≥75
• • After Aging Elongation (%): ≥50
• • Aging Condition (xhrs): 100°C x 24h x 7d
• • Cold Bend (No Visible Crack): -20±2°C
• • Temperature Range: -20°C ~ +75°C
• • Velocity of Propagation (%) NVP: 70%

Electrical Performance:

• • ACRF - Attenuation to Crosstalk Ratio - Far End (dB/100m)
• • NEXT - Near End Crosstalk (dB/100m)
• • ACR - Attenuation to Crosstalk Ratio (dB/100m)
• • PSNEXT - Power Sum Near End Crosstalk (dB/100m)
• • ELFEXT - Equal Level Far End Crosstalk (dB/100m)
• • PSELFEXT - Power Sum Equal Leverl Far End Crosstalk (dB/100m)
• • RL - Return Loss (dB)
• • TCL - Transverse Conversion Loss (dB/100m)
• • ATT - Attenuation (dB/100m)

Physical Properties:

• • Jacket Material: FR - PVC
• • Insulation Material : HDPE
• • Conductor Material: Solid Bare Copper
• • Filler: Low Smoke
• • Rip Cord: Yes
• • Drain Wire: No
• • Construction: CMR/Non-Plenum
• • Twisting Lay Length: 30 underneath
• • Cabling Lay Length (±20mm): 90
• • Voltage Rating(Max): DC 300V

 Specification :

• • Size AWG: 23
• • Number of Pair: 4
• • Conductor Nominal Outside Diameter: 0.57 mm
• • Insulation Diameter (±0.05mm): 1.03 mm
• • Jacket Average Thickness: 0.8 mm
• • Jacket Minimum Point Thickness: 0.7 mm
• • Jacket Outer Diameter (±0.2mm): 6.9 mm
• • Length : 1000ft ± 4ft
• • Weight : 0.0441 lbs
• • Part No : 6ACMR234Rx

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color