Product Information

Specification

1"-W Plain End Schedule 80 PVC Pipe 800-010 (4 X 5ft)

Description

PVC is the most commonly used plastic material for manufacturing plastic pipes. It has a relatively high tensile strength and module of elasticity. These features make it stronger and more rigid than most other thermoplastics. It is also resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens. The joining methods for PVC are solvent cementing, threading (Schedule 80 ONLY), or flanging. The pressure rating systems given are for solvent-cemented systems. When adding valves, flanges, or other components, the system must be de-rated to the rating of the lowest component: threaded fittings are rated at 50% of solvent-cement systems; flanged fittings are rated at 150 psi union fittings are rated at 235 psi. Please see manufacturers' recommendations for other ratings. Do not test or use PVC piping for air or compressed gases.

Features

‣ Economical to install and maintain.

‣ IPS-sized (inches) 1/8-24".

‣ Normally gray in color. Can be threaded.

‣ Not affected by soil in buried applications; required water-based latex paint for outdoor, sunlight-exposed installations.

‣ Handles temperatures up to 140. Standard length 20'.

‣ Conforms to ASTM D-1785, Type 1, Grade 1.

‣ All PVC piping is produced from NSF-approved compounds conforming to ASTM D-1784.

‣ National Sanitation Foundation (NSF) approved pipe sizes of 1/2-12" for use in potable water service.

‣ Available in larger sizes on request.