*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
APPLICATIONS
Southwire Type SE, service entrance cable is primarily used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard; however, the cable may be used in all applications where Type SE cable is permitted. SER may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating is 600 volts.
SPECIFICATIONS
ASTM- All applicable standards
UL Standard 44 for XHHW-2 conductors
UL Standard 83 for THHN/THWN conductors
UL Standard 854
Federal Specification A-A-59544
National Electrical Code, NFPA 70. 2011 Edition
RoHS/ REACH
CONSTRUCTION
Southwire Type cable is constructed with sunlight resistant Type XHHW-2 conductors or Type THHN/THWN conductors. Copper conductors are annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed with sunlight resistant gray polyvinyl chloride (PVC). Available as 1 conductor with a concentric ground, 2 conductor with a round or concentric ground, or 3 conductor with a bare ground. SE cable is jacketed with gray sunlight resistant polyvinyl chloride (PVC).
*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
Video
pdf
Get in Touch
Live Chat
Get replies right away!
Email
info@nassaunationalcable.com
Call Us: 1-516-482-6313 Text Us: 1-516-703-3460
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
8-8-8 BARE CONCENTRIC GROUND SERVICE ENTRANCE CABLE (SEU) - CU
choosing a selection results in a full page refresh
