{"product_id":"571-31-3263-c-l-x-type-mc-hl-xhhw-2-8-awg-3-conductors","title":"571-31-3263 C-L-X Type MC-HL (XHHW-2) - 8 AWG - 4 Conductors","description":"\u003cp\u003e\u003cstrong\u003e8 AWG 4C W\/G C-L-X Type MC-HL (XHHW-2) 571-31-3263\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003cbr\u003e X-Olene® is Okonite's trade name for its chemically cross-linked polyethylene, with high dielectric strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly and Coverings\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe individual conductors are cabled together with non-hygroscopic fillers and a binder tape overall. The C-L-X sheath exceeds the grounding conductor requirements of Table 250.122 of the NEC and UL 1569. A bare stranded copper grounding conductor(s), located in the outer interstices, is provided for grounding. The impervious, continuous, welded, corrugated aluminum C-L-X sheath provides complete protection against moisture, liquids and gases and has excellent mechanical strength. For direct burial in the ground, embedment in concrete, or for areas subjected to corrosive atmospheres, the C-L-X sheath is protected with a low temperature black Okoseal® (PVC) jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003e C-L-X Type MC-HL cables with the impervious, continuous, corrugated aluminum sheath are recommended as an economical alternate to a wire in conduit system.\u003cbr\u003e They are authorized for use on services, feeders and branch circuits for power, lighting, control and signaling circuits in accordance with Article 330 and 725 of the NEC.\u003cbr\u003e C-L-X Type MC-HL cables may be installed in doors or outdoors, in wet or dry locations, as open runs of cable secured to supports spaced not more than six feet apart, in cable tray, as aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. C-L-X type MC-HL cables are also approved for Classes I, II and III, Division 1 and 2 and Class I, Zones 1 and 2 hazardous locations — NEC Articles 501, 502, 503 and 505.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Uncoated soft copper per ASTM B-3. Sizes smaller than #8 are compress stranded per ASTM B-8. Sizes #8 and larger are compact stranded per ASTM B-496.\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eX-Olene per ICEA S-95-658\/NEMA WC70 and UL 44, Listed UL Type XHHW-2. Meets MIL-DTL-1377H, section 4.8.4.1.2 cold bend at -66°C and ASTM D746-04 brittle point at -76°C.\u003cbr\u003e \u003cstrong\u003eConductor Identification:\u003c\/strong\u003e Control Sizes, #9 AWG and smaller, color coded insulation\u003cbr\u003e Power Sizes, #8 AWG and larger, black with printed words of number and color.\u003cbr\u003e \u003cstrong\u003eGrounding Conductor(s):\u003c\/strong\u003e One or three bare soft copper per ASTM B-3. Stranded in accordance with UL 1581. Meets or exceeds requirements of NEC Table 250.122.\u003cbr\u003e \u003cstrong\u003eSheath:\u003c\/strong\u003e Close fitting, impervious, continuous, welded, corrugated aluminum C-L-X per UL 1569. Exceeds grounding conductor requirements of NEC Table 250.122.\u003cbr\u003e \u003cstrong\u003eJacket:\u003c\/strong\u003e Black Okoseal (PVC) per UL1569. Meets ASTM D746-04 brittle point at -40°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL Listed as Type MC-HL cable per E38916\u003c\/li\u003e\n\u003cli\u003eUL Listed for cable tray use, direct burial and sunlight resistant.\u003c\/li\u003e\n\u003cli\u003eUL 1309 (CWCMC) listed \u0026amp; UL classified in accord with IEEE 1580 as Marine Ship board Cable rated 600\/1000 volts.\u003c\/li\u003e\n\u003cli\u003eCSA listed as RA90, FT4, HL and LTGG (-40°C).\u003c\/li\u003e\n\u003cli\u003ePasses the IEEE 383-1974 and IEEE 1202 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system; color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL standards.\u003c\/li\u003e\n\u003cli\u003e90°C continuous operating temperature in all types of installations.\u003c\/li\u003e\n\u003cli\u003e130°C emergency rating.\u003c\/li\u003e\n\u003cli\u003e250°C short circuit rating.\u003c\/li\u003e\n\u003cli\u003eGood EMI shielding characteristics.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous metallic sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eProvides excellent grounding safety.\u003c\/li\u003e\n\u003cli\u003eExcellent compression and impact resistance.\u003c\/li\u003e\n\u003cli\u003eContinuous long lengths.\u003c\/li\u003e\n\u003cli\u003eInstallation temperature of -40°C or °F.\u003c\/li\u003e\n\u003cli\u003eComplies with NEC Articles 501, 502 and 503 for hazardous locations.\u003c\/li\u003e\n\u003cli\u003eAmerican Bureau of Shipping Type approved as CWCMC Type MC-HL.\u003c\/li\u003e\n\u003cli\u003eThree symmetrical grounding conductors for PWM\/VFD and other modern AC drive\/motor applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No: \u003c\/strong\u003e571-31-3263\u003cbr\u003e\u003cstrong\u003eGauge Size:\u003c\/strong\u003e 8 AWG\u003cbr\u003e\u003cstrong\u003eConductor:\u003c\/strong\u003e 4\u003cbr\u003e\u003cstrong\u003eInsulation Thickness:\u003c\/strong\u003e 45 mils\u003cbr\u003e\u003cstrong\u003egrounding conductor:\u003c\/strong\u003e 10 AWG\u003cbr\u003e\u003cstrong\u003eCore OD:\u003c\/strong\u003e 0.58 Inches\u003cbr\u003e\u003cstrong\u003eC-L-X OD:\u003c\/strong\u003e 0.80 Inches\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eJacket Thickness:\u003c\/strong\u003e 1.27 mm\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eApprox OD:\u003c\/strong\u003e 0.90 Inches\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 465 lbs \/ 1000ft\u003cbr\u003e\u003c\/p\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27540328841316,"sku":"NNC7110X","price":8.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/clx-mchl-xhhw2_33_48fa5f4c-44c8-4285-aa0c-a90b3e9acbc6.jpg?v=1762460891","url":"https:\/\/nassaunationalcable.com\/products\/571-31-3263-c-l-x-type-mc-hl-xhhw-2-8-awg-3-conductors","provider":"NassauNationalCable","version":"1.0","type":"link"}