{"product_id":"2-0-awg-hvteck-copper-220-mil-trxlpe-cb-aia-15kv-133-il-red-pvc-jacket-csa","title":"2\/0 AWG HVTECK Copper 220 mil TRXLPE CB AIA 15KV 133% IL Red PVC Jacket CSA","description":"\u003cp\u003e[pdf] \u003cembed src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/SOUTHWIRE_SPEC26316_1.pdf?v=1756371899\" width=\"\" height=\"\" type=\"application\/pdf\"\u003e [\/pdf]\u003c\/embed\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan data-sheets-root=\"1\"\u003e2\/0 AWG HVTECK Copper 220 mil TRXLPE CB AIA 15KV 133% IL Red PVC Jacket CSA\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs \/FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e2\/0 AWG HVTECK Copper 1\/C 15kV TRXLPE cable, 220 mil TRXLPE 15kV copper wire, HVTECK 15kV red PVC jacket wire, 15kV TRXLPE copper cable CSA, 2\/0 AWG 220 mil TRXLPE copper wire 15kV, Copper 1\/C 15kV TRXLPE insulated wire, 15kV 133% IL copper wire CSA, HVTECK TRXLPE AIA 15kV cable, Red PVC jacketed 15kV copper wire, 2\/0 AWG HVTECK 220 mil TRXLPE 15kV cable.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e• Conductor: \u003c\/strong\u003eClass B compressed stranded bare copper per ASTM B3 and ASTM B8\u003cstrong\u003e\u003cbr\u003e• Conductor Shield: \u003c\/strong\u003eSemi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Insulation: \u003c\/strong\u003e220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level\u003cstrong\u003e\u003cbr\u003e•  Insulation Shield:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eStrippable semi-conducting cross-linked copolymer\u003cstrong\u003e\u003cbr\u003e• Concentric Shield: \u003c\/strong\u003eConcentrically applied copper bond \/ shield wires. Complies with greater than the minimum requirement as per Table 44, CSA Standard C68.10 and Table 16A, Canadian Electrical Code Part 1\u003cstrong\u003e\u003cbr\u003e•  Neutral Separator:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMylar tape\u003cstrong\u003e\u003cbr\u003e•  Inner Jacket:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePVC inner jacket\u003cstrong\u003e\u003cbr\u003e• Armour: \u003c\/strong\u003eAluminum Interlocked Armour (AIA)\u003cstrong\u003e\u003cbr\u003e• Overall Jacket: \u003c\/strong\u003eRed Polyvinyl Chloride (PVC) Jacket\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e• ASTM B3 Soft or Annealed Copper Wire\u003cbr\u003e• ASTM B8 Concentric-Lay-Stranded Copper Conductors\u003cbr\u003e• CSA C22.2 No. 174 Cables in Hazardous Locations\u003cbr\u003e• CSA C22.2 No. 2556 \u0026amp; No. 0.3 Wire and Cable Test Methods\u003cbr\u003e• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV\u003cbr\u003e• CSA C68.3 Shielded \u0026amp; Concentric Neutral Power Cable - 5 to 46 kV\u003cbr\u003e• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating\u003cbr\u003e• CSA HL - for Hazardous Locations rating\u003cbr\u003e• CSA SUN RES - for Sunlight Resistant rating\u003cbr\u003e• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable\u003cbr\u003e• ICEA T-29-520 Flame Test (210,000 BTU\/Hr)\u003cbr\u003e• IEEE 383 Flame Test (70,000 btu)\u003cbr\u003e• IEEE 1202 FT4 Flame Test (70,000) BTU\/hr Vertical Tray Test (1\/0 and Larger)\u003cbr\u003e• FT1 Flame Test (1,706 BTU\/Hr nominal - Vertical Wire Flame Test)\u003cbr\u003e• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e• Size:\u003c\/strong\u003e\u003cspan\u003e 2\/0 AWG\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Number of Strands:\u003c\/strong\u003e  19\u003cbr\u003e\u003cstrong\u003e• Diameter Over Conductor (inch):\u003c\/strong\u003e  0.405\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation (inch):\u003c\/strong\u003e   0.883\u003cbr\u003e\u003cstrong\u003e• Insul. Thickness mil: \u003c\/strong\u003e220\u003cbr\u003e\u003cstrong\u003e• Diameter Over Insulation Shield (inch):  \u003c\/strong\u003e0.943\u003cbr\u003e\u003cstrong\u003e• Concentric Neutral No. x AWG: \u003c\/strong\u003e11x14\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e• Inner Jacket Thickness (mil):\u003c\/strong\u003e   80\u003cbr\u003e\u003cstrong\u003e• Diameter Over Armor\u003c\/strong\u003e \u003cstrong\u003e(inch):\u003c\/strong\u003e  1.563\u003cbr\u003e\u003cstrong\u003e• Overall Jacket Thickness mil :\u003c\/strong\u003e 60\u003cbr\u003e\u003cstrong\u003e• Approx. OD inch :  \u003c\/strong\u003e1.683\u003cbr\u003e\u003cstrong\u003e• Copper Weight lb\/1000ft:  \u003c\/strong\u003e559\u003cbr\u003e\u003cstrong\u003e• Approx. Weight (Lbs\/1000'Ft):\u003c\/strong\u003e  1432\u003cbr\u003e\u003cstrong\u003e• Min Bending Radius (In):\u003c\/strong\u003e   20.2\u003cbr\u003e\u003cstrong\u003e• DC Resistance @ 25°C Ω \/1000ft:\u003c\/strong\u003e  0.081\u003cbr\u003e\u003cstrong\u003e• AC Resistance @ 90°Ω \/1000ft:\u003c\/strong\u003e   0.102\u003cbr\u003e\u003cstrong\u003e• Inductive Reactance @ 60HzΩ\/1000ft:\u003c\/strong\u003e  0.054 \u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity In Air 90°C Amp: \u003c\/strong\u003e  317\u003cbr\u003e\u003cstrong\u003e• Allowable Ampacity Directly Buried 90°C Amp:  \u003c\/strong\u003e306\u003c\/span\u003e\u003c\/p\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":55761687183729,"sku":"NNC12024","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/files\/16_f72b948d-dd21-4d53-bb01-b9600d6944db.png?v=1756372294","url":"https:\/\/nassaunationalcable.com\/products\/2-0-awg-hvteck-copper-220-mil-trxlpe-cb-aia-15kv-133-il-red-pvc-jacket-csa","provider":"NassauNationalCable","version":"1.0","type":"link"}