{"product_id":"c-l-x-type-p-os-type-itc-pltc-armored-thermocouple-extension-cable-single-pair-105-deg-c","title":"C-L-X Type P-OS, Type ITC\/PLTC Armored Thermocouple Extension Cable, Single Pair - 105 Deg. C","description":"[short]\n\u003cp\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e Okonite Type C-L-X P-OS (Pair\/triad Overall Shield) Thermocouple Extension cables are designed for use as instrumentation and process control cables in ITC non-classified or labeled circuits up to 150 volts and 5 amps (750VA) and in Class 2 or 3 Power-Limited circuits where shielding against external interference is required, but shielding against interference among groups is not required; indoors or outdoors; in wet or dry location with conductor operating temperatures up to 105°C; in cable trays; in raceways; supported by a messenger wire; under raised floors; for direct burial. Suitable Class I,Division 2, Class II, Division 2, or Class III, Division 2 and Class I, Zone 2 hazardous locations. The C-L-X sheath provides physical protection against mechanical damage. It may be installed in both exposed and concealed work, secured to supports not greater than 6 feet apart.\u003c\/p\u003e\n[\/short]\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConductors:\u003c\/strong\u003e Solid alloys per ANSI MC 96.1\u003cbr\u003e \u003cstrong\u003eInsulation: \u003c\/strong\u003eFlame-retardant Okoseal® (PVC) per UL Standard 13 and 2250, 15 mils nominal thickness, 105°C temperature rating.\u003cbr\u003e \u003cstrong\u003eConductor Identification: \u003c\/strong\u003ePigmented insulation on individual conductors.\u003cbr\u003e \u003cstrong\u003eAssembly: \u003c\/strong\u003ePair assembled with left-hand lay.\u003cbr\u003e \u003cstrong\u003eCable Shield: \u003c\/strong\u003eAluminum\/Polyester tape overlapped to provide 100% coverage, and a 7-strand tinned copper drain wire, same size as conductor.\u003cbr\u003e \u003cstrong\u003eInner Jacket: \u003c\/strong\u003eFlame-retardant, low temperature Okoseal per UL Standard 13 and 2250. A rip cord is laid longitudinally under the jacket to facilitate removal.\u003cbr\u003e \u003cstrong\u003eC-L-X Sheath: \u003c\/strong\u003eClose fitting, impervious, continuously welded and corrugated aluminum sheath provides complete protection against moisture, liquids, and gases, has excellent mechanical strength and provides equipment grounding through the sheath.\u003cbr\u003e \u003cstrong\u003eOuter Jacket: \u003c\/strong\u003eFlame-retardant, low temperature Okoseal per UL Standard 13 and 2250.\u003cstrong\u003e\u003cbr\u003e Classifications\u003c\/strong\u003e: UL Listed as ITC\/PLTC - Instrument Tray Cable\/Power Limited Tray Cable for use in accordance with Article 727 and Article 725 of the National Electrical Code.\u003cbr\u003e Cables comply with UL 2250 and UL 13 for PLTC, CL2 and CL3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePasses the UL 1581, IEEE 383-1974, \u0026amp; IEEE 1202 vertical tray flame tests.\u003c\/li\u003e\n\u003cli\u003ePasses the 210,000 BTU\/hr vertical tray flame test per ICEA T-29-520.\u003c\/li\u003e\n\u003cli\u003eComplete pre-packaged, factory-tested wiring system-color coded.\u003c\/li\u003e\n\u003cli\u003eC-L-X cables are quality control inspected to meet or exceed applicable UL Standards.\u003c\/li\u003e\n\u003cli\u003eC-L-X enclosure permits installation in cable tray containing light and power cables without a barrier separator.\u003c\/li\u003e\n\u003cli\u003eIndividual pairs or triads are color coded for simplified hook-up.\u003c\/li\u003e\n\u003cli\u003eImpervious, continuous sheath excludes moisture, gases and liquids.\u003c\/li\u003e\n\u003cli\u003eC-L-X sheath exceeds equipment grounding conductor requirements of NEC Section 250-118.\u003c\/li\u003e\n\u003cli\u003eLower installed system cost than conduit or EMT systems.\u003c\/li\u003e\n\u003cli\u003eMeets API Standards 14F and 14FZ.\u003c\/li\u003e\n\u003cli\u003eUL listed for direct burial\u003c\/li\u003e\n\u003cli\u003eSuitable for low temperature installation of -40°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nassau National Cable","offers":[{"title":"Default Title","offer_id":27553048625252,"sku":"NNC8793X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0213\/7895\/7412\/products\/clx-pos-armored-thermocouple_4_31514af1-0e7a-4191-9f63-b7fe85e28696.jpg?v=1762462121","url":"https:\/\/nassaunationalcable.com\/en-ca\/products\/c-l-x-type-p-os-type-itc-pltc-armored-thermocouple-extension-cable-single-pair-105-deg-c","provider":"NassauNationalCable","version":"1.0","type":"link"}